日本东北大学教授，日本工程院院士。在环境促进开裂时域分析、应力腐蚀扩展的理论模型以及寿命预测、材料性能退化管理方面做出了开创性的成果，尤其是在轻水型核电站材料环境促进开裂特别是应力腐蚀破裂方面的卓越研究工作赢得了国际同行的高度评价，发表学术论文500多篇，主编/参编著作9本，获准专利8项。

代表性研究成果

(1)T. Shoji, "Crack-Tip Blunting and Crack-Opening Displacement under Large-Scale Yielding", Metal Science, Vol.10, Iss.5, (1976), 165-169.

(2)M. SUZUKI, H. TAKAHASHI, T. SHOJI, T. KONDO and H. NAKAJIMA, "THE ENVIRONMENT ENHANCED CRACK GROWTH EFFECTS IN STRUCTURAL STEELS FOR WATER COOLED NUCLEAR REACTORS", Proceedings of Conference on The Influence of Environment on Fatigue, Institution of Mechanical Engineers, London, (1977), 161-169.

(3)SIGEKI AIYAMA, TETSUO SHOJI, HIDEAKI TAKAHASHI, and MASAHIKO SUZUKI, "Stress Corrosion Cracking and Corrosion Fatigue in Cr-Mo Low Alloy Steel", CORROSION, Vol.34, Iss.10, (1978), 325-331.

(4)T. SHOJI, S. AIYAMA, H. TAKAHASHI and M. SUZUKI, "EFFECT OF STRESS INTENSITY RATE K AND STRESS RATIO R ON CORROSION FATIGUE CRACK GROWTH ENHANCEMENT BELOW KISCC ", CORROSION, Vol.34, No.8, (1978), 276-282.

(5)T. SHOJI, T. ISE, H. TAKAHASHI, and M. SUZUKI, "Intergranular Corrosion Fatigue Crack Growth of Sensitized Type 304 Stainless Steel in Oxygenated Pure Water at 85C", CORROSION, Vol.34, Iss.10, (1978), 366-368.

(6)TETSUO SHOJI, HIDEKI TAKAHASHI and MASAHIKO SUZUKI, "Corrosion Fatigue Aspects in BWR Pipe Cracking", Predictive Methods for Assessing Corrosion Damage to BWR Piping and PWR Steam Generators, NACE, Japan, May 28-June 2, (1978), 58-72.

(7)T. Shoji, H. Takahashi and M. Suzuki, "Significance of crack opening displacement and crack tip plastic strain energy in fracture initiation", Metal Science, Vol.12, Iss.12, (1978), 579-586.

(8)庄子哲雄, 伊達和博, 高橋秀明, 鈴木正彦, ｢破壊靭性試験におけるき裂端強変形域の再結晶法による評価｣, 非破壊検査, 第27巻, 第8号, (1978), 499-505.

(9)Hideaki Takahashi, Kiyoshi Saito, Tetsuo Shoji, Kazuhiro Date, Masahiko Suzuki, "Reactor Surveillance Test and Fracture Mechanics Evaluation of Irradiation Embrittlement in Reactor Pressure Vessel Steels", Journal of Engineering Materials and Technology, Vol.102, Iss.4, (1980), 317-326.

(10)T. SHOJI, M. A. KHAN, H. TAKAHASHI and M. SUZUKI, "TRIAXIALITY EFFECTS ON DUCTILE FRACTURE AND ACOUSTIC EMISSION CHARACTERISTICS", Res Mechanica, Vol.2, No.1, (1981), 21-38.

(11)MASUMI SAKA, TETSUO SHOJI, HIDEAKI TAKAHASHI and HIROYUKI ABE, "VIRTUAL INITIATION ANALYSIS OF A DUCTILE CRACK IN PLANE STRAIN LARGE-SCALE YIELDING", Res Mechanica Letters, Vol.1, No.1, (1981), 35-38.

(12)坂真澄, 庄子哲雄, 高橋秀明, 阿部博之, ｢大規模降伏状態におけるき裂材の有限変形解析｣, 日本機械学会論文集A編, 47巻, 414号, (1981), 148-157.

(13)庄子哲雄, 大谷行雄, 高橋秀明, 鈴木正彦, ｢低合金鋼の85℃純水中における腐食疲労｣, 日本機械学会論文集A編, 47巻, 416号 (1981), 391-399.

(14)M. A. KHAN, T. SHOJI and H. TAKAHASHI, "SIGNIFICANCE OF THE ACOUSTIC EMISSION TECHNIQUE IN MONITORING CLEAVAGE CONTROLLED INSTABILITY", Res Mechanica Letters, 1, 3 (1981), 133-138.

(15)Tetsuo Shoji, "Determination of Crack Tip Energy Dissipation and Elastic-Plastic Fracture Toughness Parameter with Ductile Crack Extension", Journal of Testing and Evaluation, 9, 6 (1981), 324-334.

(16)坂真澄, 庄子哲雄, 高橋秀明, 阿部博之, ｢伝ぱする延性き裂先端近傍の強変形域と無次元伝ぱパラメータ｣, 日本機械学会論文集A編, 47, 424 (1981), 1301-1308.

(17)T. Shoji, H. Takahashi, M. Suzuki, T. Kondo, "A New Parameter for Characterizing Corrosion Fatigue Crack Growth", Journal of Engineering Materials and Technology, 103 (1981), 298-304.

(18)M. A. Khan, T. Shoji, H. Takahashi, M. Suzuki, "Evaluation of Radiation Damage in Reactor Pressure Vessel Steel by Elastic-Plastic Fracture Mechanics", Transactions of the ASME, Journal of Engineering Materials and Technology, 103, 3 (1981), 276-281.

(19)庄子哲雄, 斎藤喜久, 高橋秀明, 鈴木正彦, ｢ボイラS/H管の高温腐食およびクリープ環境下における寿命予測｣, 防食技術, 31, 3 (1981), 196-201.

(20)H. Nakajima, T. Shoji, M. Kikuchi, H. Niitsuma and M. Shindo, "Detecting Acoustic Emission during Cyclic Crack Growth in Simulated BWR Environment", Proceedings of Symposium on Fatigue Crack Growth Measurement and Data Analysis, ASTM STP 738, (1981), 139-160.

(21)M. A. Khan, Tetsuo Shoji, and Hideaki Takahashi, "Characterization of the Crack Toughness Behavior of Structural Steels by the Tearing Modulus Parameter and Acoustic Emission", Journal of Testing and Evaluation, 10, 1 (1982), 3-11.

(22)M. A. Khan, T. Shoji, and H. Takahashi, "Acoustic emission from cleavage microcracking in alloy steels", Metal Science, 16, 2 (1982), 118-126.

(23)M. A. KHAN, T. SHOJI, H. NIITSUMA and H. TAKAHASHI, "ACOUSTIC EMISSION RATING PARAMETER FOR PREDICTION OF TEARING INSTABILITY IN STRUCTURAL MATERIALS", Engineering Fracture Mechanics, 16, 5 (1982), 645-658.

(24)橋田俊之, 坂真澄, 安斎英哉, 庄子哲雄, 高橋秀明, ｢小型破壊じん性試験片による延性破壊抵抗の評価｣, 日本機械学会論文集A編, 48, 433 (1982), 1111-1119.

(25)斎藤喜久, 庄子哲雄, ｢ボイラ過熱器管寿命評価のための複層合成灰腐食試験法｣, 防食技術, 31 , 3 (1982), 232-238.

(26)M. SAKA, T. SHOJI, H. TAKAHASHI and H. ABE, "FINITE DEFORMATION ANALYSIS OF COD, J-INTEGRAL AND CRACK TIP INTENSE STRAIN REGION IN PLANE STRAIN LARGE-SCALE YIELDING", Journal Mechanics and Physics of Solids, 30, 4 (1982), 209-224.

(27)M. A. Khan, T. Shoji and H. Takahashi, "Evaluation of Structural Integrity by Acoustic Emission and Fracture Mechanics Techniques", Proceedings of 6th International Acoustic Emission Symposium, the Japanese Society for Non Destructive Inspection, (1982), 531-541.

(28)庄子哲雄, 中島甫, 近藤達男, 高橋秀明, ｢腐食疲労き裂成長に及ぼす力学的因子の役割｣,　材料, 31, 346 (1982), 703-709.

(29)中島甫, 庄子哲雄, 辻宏和, 高橋秀明, 近藤達男, ｢SA533B鋼溶接熱影響部の疲労き裂成長に及ぼす高温水環境の影響｣, 材料, 31, 346 (1982), 710-716.

(30)T. Shoji and H. Takahashi, "Characterization of Ductile Crack Growth Behavior Based on Energy Dissipation within Intense Strain Region at Crack Tip", Proceedings of a CSNI Workshop on Ductile Fracture Test Methods, Dec. 1-3, 1982, Paris, Committee on the Safety of Nuclear Installations, Nuclear Energy Agency, OECD, (1983), 428-449.

(31)下村慶一, 庄子哲雄, 高橋秀明, ｢AE周波数解析によるCr-Mo-V鋼のポップイン型粒界割れの検知｣, 鉄と鋼, 16 (1983), 118-125.

(32)坂真澄, 庄子哲雄, 高橋秀明, 阿部博之, ｢テアリングモジュラスTwとき裂端近傍の応力ならびにひずみ場に基づくその評価｣, 日本機械学会論文集A編, 49, 438 (1983), 166-171.

(33)坂真澄, 安斎英哉, 庄子哲雄, 高橋秀明, 阿部博之, ｢延性き裂伝ぱ抵抗としてのテアリングモジュラス (Tj,Tδ,Tw) の有効性に関する実験的検証｣, 日本機械学会論文集A編, 49, 44 (1983), 829-837.

(34)M. Saka, T. Shoji, H. Takahashi, and H. Abe, "A Criterion Based on Crack-Tip Energy Dissipation in Plane Strain Crack Growth under Large-Scale Yielding", ASTM STP 803, 1 (1983), I-130-I-158.

(35)Tetsuo Shoji, Hajime Nakajima, Hirokazu Tsuji, Hideaki Takahashi, and Tatsuo Kondo, "Effect of Microstructure and Strength of Low-Alloy Steels on Cyclic Crack Growth in High-Temperature Water", ASTM STP 801 (1983), 256-286.

(36)M. A. Khan, T. Shoji, H. Takahashi and H. Niitsuma, "Combined Elastic-Plastic and Acoustic Emission Methods for the Evaluation of Tearing and Cleavage Crack Extension", ASTM STP 803, II, (1983), II-508-II-530.

(37)K. Shimomura, T. Shoji, H. Takahashi and K. Saito, "DETERMINATION OF INTERGRANULAR-CLEAVAGE MODE FRACTURE TOUGHNESS OF RETIRED STEAM TURBINE ROTOR STEEL (CrMoV) BY MEANS OF ACOUSTIC EMISSION TECHNIQUE", Progress in Acoustic Emission II, The 7th International Symposium, (1984), 89-96.

(38)T. SHOJI, K. TAMAKAWA, H. TAKAHASHI and T. WAKABAYASHI, "APPLICATION OF ACOUSTIC EMISSION TO FRACTURE TOUGHNESS TEST OF ROCKS UNDER THE SIMULATED GEOTHERMAL RESERVOIR CONDITIONS", Progress in Acoustic Emission II, The 7th International Symposium, (1984), 616-623.

(39)高橋秀明, 庄子哲雄, 鈴木正彦, 村松正光, 木村和成, 斎藤潔, 鈴木雅行, ｢蒸気タービン･発電機部材の新しい非破壊的経年劣化診断技術｣, 電気現場技術, 23, 261, (1984), 1-7.

(40)J. CONGLETON, T. SHOJI and R. N. PARKINS, "THE STRESS CORROSION CRACKING OF REACTOR PRESSURE VESSEL STEEL IN HIGH TEMPERATURE WATER", Corrosion Science, 25, 8-9 (1985), 633-650.

(41)J. CONGLETON, H. C. SHIH, T. SHOJI and R .N. PARKINS, "THE STRESS CORROSION CRACKING OF TYPE 316 STAINLESS STEEL IN OXYGENATED AND CHLORINATED HIGH TEMPERATURE WATER", Corrosion Science, 25, 8-9 (1985), 769-788.

(42)安斉英哉, 庄子哲雄, 高橋秀明, 中島甫, 近藤達男, ｢低ひずみ速度破壊じん性試験による原子炉圧力容器鋼の環境割れ感受性の評価｣, 日本機械学会論文集A編, 51, 463 (1985), 714-722.

(43)竹内正道, 庄子哲雄, 高橋秀明, 穴山武, ｢核融合炉大形超伝導マグネット構造材料の極低温における破壊じん性評価｣, 日本機械学会論文集A編, 51, 470 (1985), 2256-2264.

(44)鬼沢邦雄, 庄子哲雄, 高橋秀明, 安藤柱, ｢再結晶法による延性不安定破壊の評価(破壊じん性試験片と表面き裂試験片の対比)｣, 日本機械学会論文集A編, 51, 462 (1985), 514-517.

(45)Tetsuo Shoji, Kazuo Hayashi ,Takashi Kojima, Takatoshi Ito, Hideaki Takahashi and Hiroyuki Abe, "GROWTH BEHAVIOR OF HYDRAULICALLY CREATED CRACK AND ITS SIZE EVALUATION USING WELL LOGGING DATA -CRUSTAL ROCK FRACTURE MECHANICS APPROACH-", Geothermal Resources Council, Transactions, 9, II (1985), 579-584.

(46)K. Hayashi, T. Shoji, H. Niitsuma, T. Ito and H. Abe, "A NEW IN-SITU TECTONIC STRESS MEASUREMENTS AND ITS APPLICATION TO A GEOTHERMAL MODEL FIELD", Geothermal Resources Council, Transactions, 9, II (1985), 99-104.

(47)T. Shoji, "QUANTITATIVE PREDICTION OF ENVIRONMENTALLY ASSISTED CRACKING BASED ON CRACK TIP STRAIN RATE", Proceedings of Predictive Capabilities in Environmentally Assisted Cracking, PVP 99, (1985), 127-142.

(48)大西慶太, 庄子哲雄, 高橋秀明, ｢極低温用構造材料溶接部の微視破壊過程と破壊じん性評価｣, 日本機械学会論文集A編, 52, 473 (1986), 170-173.

(49)下村慶一, 庄子哲雄, 高橋秀明, 斎藤潔, ｢Cr-Mo-V 鋼の遷移温度域における粒界割れ破壊靭性の試験片寸法効果｣, 鉄と鋼, 11 (1986), 1744-1750.

(50)R. L. TOBLER, T. SHOJI, H. TAKAHASHI, and K. OHNISHI, "FRACTURE, ACOUSTIC EMISSION AND ADIABATIC HEATING OF AUSTENITIC STAINLESS STEELS AT LIQUID HELIUM TEMPERATURE", Progress in Acoustic Emission III, The 8th International Acoustic Emission Symposium, Eds., K. Yamaguchi, K. Aoki, and T. Kishi, The Japanese Society of NDI, (1986), 453-461.

(51)張舜植, 庄子哲雄, 高橋秀明, 渡辺豊, ｢流動海水環境における高張力鋼の腐食疲労｣, 防食技術, 35, 9 (1986), 503-508.

(52)斎藤喜久, 庄子哲雄, 高橋秀明, ｢ボイラ過熱器SUS316H鋼管の経年劣化｣, 日本機械学会論文集A編, 52, 473 (1986), 165-169.

(53)橋田俊之, 庄子哲雄, 村松正浩, ｢エポキシ樹脂を用いた地下き裂進展挙動のシミュレーション｣, 日本機械学会論文集A編, 52, 480 (1986), 1906-1912.

(54)Yoshihisa Saito, Tetsuo Shoji, Hideaki Takahashi, "MATERIALS DEGRADATION AND ITS RELEVANCE TO LIFE ASSESSMENT OF SUPERHEATER TUBES OF FOSSIL BOILERS", Proceedings of Conference on Life Extension and Assessment of Fossil Plants, EPRI, EEI, ASME and ASM, (1986), 3-8.

(55)T. Shoji and H. Takahashi, "NON-DESTRUCTIVE EVALUATION OF MATERIALS DEGRADATION DURING SERVICE OPERATION BY MEANS OF ELECTRO-CHEMICAL METHOD", Proceedings Conference on Life Extension and Assessment of Fossil Plants, EPRI, EEI, ASME and ASM, (1986), 4-8.

(56)和田千春, 庄子哲雄, ｢花崗岩の破壊じん性とその初期接線縦弾性係数依存性｣, 材料, 35, 389 (1986), 145-151.

(57)和田千春, 庄子哲雄, 高橋秀明, ｢高温高圧水中における花崗岩の破壊じん性評価｣, 日本機械学会論文集A編, 52, 476 (1986), 1082-1088.

(58)K. Saito, K. Kimura, M. Muramatsu, H. Kashiwaya, Y. S. Lu, T. Shoji and H. Takahashi, "ELECTROCHEMICAL POLARIZATION TECHNIQUE TO DETECT IN-SERVICE DEGRADATION OF MATERIAL TOUGHNESS", Proceedings of Fossil Plant Inspection Workshop, EPRI and ASME, (1986), 4-9.

(59)Xinyuan Mao, Tetsuo Shoji, and Hideaki Takahashi, "Characterization of Fracture Behavior in Small Punch Test by Combined Recrystallization-Etch Method and Rigid Plastic Analysis", Journal of Testing and Evaluation, 15, 1 (1987), 30-37.

(60)盧友紹, 庄子哲雄, 高橋秀明, ｢クロム・モリブデン・バナジウム耐熱鋼（タービンロータ鋼)の新しい経年劣化診断技術｣, 日本機械学会論文集A編, 53 , 492 (1987), 1550-1557.

(61)盧友紹, 庄子哲雄, 高橋秀明, 斎藤喜久, ｢小型パンチ (SP) 試験法ならびに電気化学的再活性化法 (EPR) によるオーステナイト系ステンレス鋼の材質経年劣化診断技術｣, 材料, 36 , 402 (1987), 296-302.

(62)下村慶一, 庄子哲雄, 高橋秀明, ｢へき開破壊の弾塑性破壊靭性評価に関する確率･統計論的研究｣, 日本機械学会論文集A編, 53 , 495 (1987), 2121-2127.

(63)K. Shimomura, T. Shoji, and H. Takahashi, "Evaluation of Intergranular Fracture Initiation in Transition Region of Retired Steam Turbine Rotor Steel Using Small Specimens and the Acoustic Emission Technique", Journal of Testing and Evaluation, 15, 5 (1987), 257-264.

(64)村田裕之, 橋田俊之, 庄子哲雄, 高橋秀明, ｢花こう岩の混合モードき裂進展挙動に及ぼす異方性の影響｣, 日本機械学会論文集A編, 53 , 489, (1987), 894-898.

(65)H. Takahashi, T. Shoji, T. Kondo, N. Nakajima and J. Kuniya, "Time domain analysis for quantitative evaluation of EAC and its relevance to life evaluation procedure of RPV", TRANSACTIONS OF THE 9TH INTERNATIONAL CONFERENCE ON STRUCTURAL MECHANICS IN REACTOR TECHNOLOGY, F (1987), 233-238.

(66)H. Takahashi, T. Shoji and H. Abe, "Recent Progress and Future of Γ Project at Tohoku University", Geothermics, 16, 4 (1987), 409-418.

(67)T. Shoji and H. Takahashi, "Critical cracking potential for stress corrosion cracking of nuclear pressure vessel steels in pressurized high temperature waters", TRANSACTIONS OF THE 9TH INTERNATIONAL CONFERENCE ON STRUCTURAL MECHANICS IN REACTOR TECHNOLOGY, A (1987), 119-124.

(68)J. Congleton and T. Shoji, "Slow strain rate testing of RPV steels in high temperature water", TRANSACTIONS OF THE 9TH INTERNATIONAL CONFERENCE ON STRUCTURAL MECHANICS IN REACTOR TECHNOLOGY, H (1987), 265-270.

(69)Fumio Nogata, Kenji Seo, Hideaki Takahashi, Tetsuo Shoji, Lu You Sho, Koji Kawano, Se-Hi Chung and Yang-Bing-Xian, "DETECTION OF MATERIAL DEGRADATION ON CrMo STEEL DURING SERVICE OPERATION BY A CHEMICAL ETCHING TEST", Proceedings of the Fifth International Conference on Mechanical Behavior of Materials-V, ICM-5, (1987), 1109-1114.

(70)Yasuhide Shindo, Tetsuo Shoji and Masumi Saka, "A MAGNETO-FRACTURE MECHANICS APPROACH TO THE STRUCTURAL INTEGRITY ASSESSMENT SYSTEM OF A SUPER-CONDUCTING MAGNET FOR A FUSION REACTOR", Electromagnetomechanical Interactions in Deformable Solids and Structures, (1987), 131-136.

(71)Yashihisa Saito, Tetsuo Shoji and Hideaki Takahashi, "Non-Destructive Diagnostics Technique by means of Electrochemical, Polarization method for Materials Degradation of S/H Tubes of Fossil Boilers", Proceedings of the International Conference on Advances in Material Technology for Fossil, Power Plants, Chicago, Illinois, ASM International and EPRI, (1987), 1-8.

(72)盧友紹, 高橋秀明, 庄子哲雄, ｢AEによるマルテンサイト及びフェライト・マルテンサイト鋼の焼もどし脆化の評価｣, 非破壊検査, 36, 7 (1987), 481-487.

(73)高橋秀明,　庄子哲雄, ｢地熱材料のエロ-ジョン・コロージョン簡易試験法｣, サンシャインジャーナル, 8, 4 (1987), 30-32.

(74)庄子哲雄, 中塚勝人, ｢岩石/熱水相互作用の基礎特性とその工学利用｣, 地熱エネルギー, 13 , 4 (1988), 28-38.

(75)高橋秀明, 庄子哲雄, 二藤学, 小島隆, ｢地下き裂貯溜層性能に及ぼす岩石/熱水相互作用｣, 日本地熱学会誌, 10, 3 (1988), 193-210.

(76)椚座圭太郎, 槻山興一, 寺村敏史, 湯田周二, 井須紀文, 庄子哲雄, 高橋秀明, ｢連続式オートクレーブによるゾノトライト長繊維の直接合成｣, Gypsum & Lime, 216 (1988), 288-294.

(77)鄭熈敦, 中川裕二, 庄子哲雄, 高橋秀明, ｢水素ガス環境下での低合金鋼のき裂進展挙動とAE放出特性の評価｣. 日本機械学会論文集A編, 54, 497 (1988), 50-56.

(78)斎藤幹男, 庄子哲雄, 高橋秀明, 三浦健蔵, 熊田誠, ｢海洋環境下における高張力鋼応力腐食割れ挙動のSSRT法による評価｣, 日本機械学会論文集A編, 54, 500 (1988), 746-752.

(79)庄子哲雄, 相沢周二, 高橋秀明, ｢軽水炉水環境下における原子炉圧力容器鋼の応力腐食割れ｣, 日本機械学会論文集A編, 54, 502 (1988), 1251-1257.

(80)渡辺豊, 庄子哲雄, 高橋秀明, 森谷信一, ｢炭素鋼の気液二相流中エロージョン・コロ―ジョン損傷の電気化学的機構｣, 日本機械学会論文集A編, 54, 505 (1988), 1807-1813.

(81)八重樫彰, 松尾憲之助, 盧友紹, 庄子哲雄, 高橋秀明, ｢化学プラント高温構造部材の経年劣化機構と電気化学的手法による非破壊評価｣, 非破壊検査, 37, 2 (1988), 79-85.

(82)渡辺豊, 庄子哲雄, 高橋秀明, ｢炭素鋼の気液2相流中エロージョン･コロージョンにおける電気化学的作用｣, 防食技術, 37, 2 (1988), 69-74.

(83)Xinyuan Mao, Tetsuo Shoji, and Hideaki Takahashi, "Development of a Miniaturized Specimen Technique for Fracture Toughness JIc Measurement", Journal of Testing and Evaluation, 16, 2 (1988), 229-240.

(84)E. Nishihara, A. Yaegashi, Y. Murakami, T. Shoji and H. Takahashi, "Non-destructive Evaluation of Materials Degradation after Long Term Operation in Chemical Plants by Means of Electro-chemical Method", Proceedings of International Conference of Life Assessment and Extension, The Hague, The Netherland, (1988), 130-135.

(85)H. Takahashi, T. shoji, H. D. Jeong, Y. Saito and S. Ishizaki, "Residual Life Assessment and Non-destrictive Evaluation of Material Degradation in Fossil Power Components by Means of Small Punch Test", Proceedings of International Conference of Life Assessment and Extension, The Hague, The Netherland, (1988), 24-32.

(86)M. Shimada, R. L. Tobler, T. Shoji and H. Takahashi, "Size, Side-Grooving, and fatigue precracking effects on J-integral test results for SUS 304 Stainless Steel at 4 K", Advancs in Cryomechanics and Engineerings, 34 (1988), 251-258.

(87)H. Takahashi, T. Shoji and R. L. Tobler, "Acoustic Emission and its Applications to Fracture Studies of Stainless Steels at 4K", Advancs in Cryomechanics and Engineerings, 34 (1988), 387-395.

(88)T. Ogata, K. Ishikawa, and T. Yuri, R. L. Tobler, P. T. Purtscher, and R. P. Reed, T. Shoji, K. Nakano, H. Takahashi, “EFFECTS OF SPECIMEN SIZE, SIDE-GROOVEING, AND PRECRACKING TEMPERATURE ON J-INTEGRAL TEST RESULTS FOR AISI 316LN AT 4 K”, Advancs in Cryomechanics and Engineerings, 34 (1988), 259-266.

(89)H. Takahashi, T. Shoji, K. Nakatsuka and H. Abe, "Geochemical Reactor for Advanced Geothermal Energy Utilization", (1988) ASME/GRC, 1988, 33-38.

(90)T. Shoji, H. Takahashi, S. Aizawa and M. Saito, "EFFECTS OF SULFATE CONTAMINATION, SULFUR IN STEEL AND STRAIN RATE ON CRITICAL CRACKING POTENTIAL FOR SCC OF PRESSURE VESSEL STEELS IN PRESSURIZED HIGH TEMPERATURE WATERS", Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (1988), 251-259.

(91)H. Nakajima, T. Shoji, N. Nakajima, H. Takahashi, T. Kondo, "MATERIALS ENGINEERING ASPECTS OF AGEING PHENOMENA IN STRUCTURAL MATERIALS OF LWRS AND THEIR RELEVANCE TO R&D IN PLANT LIFE EXTENSION PROGRAMMES”, Proceedings of International Symposium on Safety Aspects of the Ageing and Maintenance of Nuclear Power Plants, IAEA-SM-295/44, (1988), 379-395.

(92)橋田俊之, 平野明彦, 庄子哲雄, 高橋秀明, ｢花こう岩の高温高圧水中応力腐食割れ挙動と時間依存型き裂進展抵抗｣, 日本機械学会論文集A編, 55 , 512 (1989), 837-842.

(93)鄭熈敦, 庄子哲雄, 高橋秀明, 八 健一, ｢炭素鋼表面き裂材の腐食疲労き裂進展挙動に関する破壊力学的研究｣, 日本機械学会論文集A編, 55 , 514 (1989), 1281-1285.

(94)松下敬, Maribel L. SAUCEDO, 四辻美年, 庄子哲雄, 高橋秀明, ｢シャルピー衝撃試験と小型パンチ試験における破面遷移挙動の相関について｣, 日本機械学会論文集A編, 55 , 515 (1989), 1619-1622.

(95)渡辺豊, 庄子哲雄, 高橋秀明, ｢炭素鋼の気液二相流中エロージョン･コロージョン損傷機構と損傷発生条件｣, 日本機械学会論文集A編, 55 , 519 (1989), 2294-2298.

(96)渡辺豊, 庄子哲雄, ｢酸化物超伝導体の破壊強度･靭性評価と破壊過程での超伝導性｣, 日本機械学会論文集A編, 55 , 512 (1989), 843-846.

(97)A. SHIMA, T. SHOJI, M. UKAKU, Y. WATANABE, Y. TAZAWA and H. SAKAI, "A NEW HIGH-Tc SUPERCONDUCTOR YBa2Ca2Cu3Ox", Modern Physics Letters B, 3, 16 (1989), 1233-1236.

(98)T. Matsushita, T. Shoji and Y. Watanabe, Y. Saito, "A NOVEL NDE METHOD FOR CREEP DAMAGE EVALUATION BY MEANS OF ELECTRODE IMPEDANCE METHOD (EIM)", The 1989 ASME Pressure Vessels and Piping Conference, (1989), 213-220.

(99)T. Shoji, K. Yoshida, "EFFECT OF INHIBITOR UPON SCC OF PRESSURE VESSEL STEELS IN PRESSURIZED HIGH TEMPERATURE WATERS", Advances in Fracture and Fatigue for the 1990's I (1989), 77-84.

(100)T. Shoji, K. Kikuchi, T. Kondo, "Materials Compatibility with High Temperature Waters and Long Term Stability in Nuclear Reactor Environments", Proceedings of the Fourth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (1989), 1-63-1-82.

(101)Tetsuo Shoji, Shin-ichi Moriya, Makoto Tada, "Computer Simulation of Environmentally Assisted Cracking of RPV Steels in LWR Environments", Proceedings of the Fourth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (1989), 8-28-8-47.

(102)T. SHOJI, K. YAMAKI AND H. TASHIRO, "Electrochemical and Mechanical Aspects of Corrosion Fatigue Crack Growth Behavior of High Strength Steels in Synthetic Sea Water", THE IRON AND STEEL INSTITUTE OF JAPAN, INTERNATIONAL CONFERENCE on EVALUATION OF MATERIALS PERFORMANCE IN SEVERE ENVIRONMENTS, (1989), 175-182.

(103)T. SHOJI, K. WATANABE, H. TAKAHASHI, "Long Term Performance of Geothermal Circulation System -Significance of Water/Rock Interaction-", CAMBORNE SCHOOL OF MINES INTERNATIONAL CONFERENCE, HOT DRY ROCK GEOTHERMAL ENERGY, (1990), 436-445.

(104)松下敬, 庄子哲雄, 斎藤喜久, ｢電気化学的手法による高温使用オーステナイト系ステンレス鋼の劣化評価技術｣, 材料, 39 , 446 (1990), 1596-1601.

(105)T. Shoji and K. Yoshida, "Effect of Inhibitor on SCC of A533B CL. 1 and Sensitized Type 304 Stainless Steels in Pressurized High-Temperature Waters", CORROSION, 46, 9 (1990), 770-773.

(106)J. K. Lim, T. Shoji, J. W. Who, S. H. Chung, H. Takahashi, "Stress Corrosion Cracking of High Strength Steels and their Weldments in Synthetic Sea water", Proceedings of the KSME/JSME Joint conference, Fracture and Strength '90, (1990), 164-169.

(107)JONG-GI Lee, TETSUO SHOJI, HIDEAKI TAKAHASHI, JAE-KYOO LIM, SE-HI CHUNG, "Surface Crack Growth Behavior in Corrosion Fatigue of Off-Shore Structural Steel", Proceedings of the KSME/JSME Joint Conference, Fracture and Strength '90, (1990), 302-307.

(108)TAKASHI MATSUSHITA, MARIBEL L. SAUCEDO, Y. H. JOO, TETSUO SHOJI, "DBTT ESTIMATION OF FERRITIC LOW ALLOY STEELS IN SERVICE PLANT BY MEANS OF SMALL PUNCH TEST", Proceedings of the KSME/JSME Joint Conference, Fracture and Strength '90, (1990), 340-345.

(109)Yutaka WATANABE and Tetsuo SHOJI, "NONDESTRUCTIVE DETECTION AND EVALUATION OF MATERIALS DEGRADATION OF 2.25Cr-1 Mo STEEL BY MEANS OF ELECTROCHEMICAL METHOD", Proceedings of the KSME/JSME Joint Conference, Fracture and Strength '90, (1990), 702-707.

(110)渡辺豊, 庄子哲雄, ｢電気化学的手法を用いた2.25Cr-1Mo鋼の経年劣化の非破壊評価｣, 材料, 40, 448 (1991), 89-95.

(111)渡辺豊, 庄子哲雄, ｢Cr-Mo-V鋼および2.25Cr-1Mo鋼の焼戻し脆化の新しい電気化学的評価手法｣, 日本機械学会論文集A編, 57 , 537 (1991), 1233-1239.

(112)YUTAKA WATANABE and TETSUO SHOJI, "The Evaluation of In-Service Materials Degradation of Low-Alloy Steels by the Electrochemical Method", Metallurgical Transactions A, 22A (1991), 2097-2106.

(113)斎藤喜久, 庄子哲雄, 渡辺豊, ｢電気化学的手法によるステンレス鋼の材質劣化現位置評価技術の開発｣, 日本機械学会論文集A編, 57 , 538 (1991), 1442-1448.

(114)庄子哲雄, 坂根正道, 近藤武志, ｢超伝導マグネット初期不整合の非破壊検出と剛性評価｣, 低温工学, 26 , 6 (1991), 472-479.

(115)渡辺豊, 庄子哲雄, ｢硝酸塩溶液を用いた電気化学的手法によるCr-Mo-V鋳鋼の焼もどし脆化の非破壊評価｣, 鉄と鋼, 第77年, 4 (1991), 566-573.

(116)Tetsuo Shoji and Yutaka Tazawa, "Deformation and fracture characteristics and its effect on the superconductivity of a high Tc superconductor (YBa2Cu3O7-x)", Materials Science and Engineering, A143 (1991), 241-245.

(117)Tetsuo Shoji and Satoshi Mori, Hideya Anzai and Jiro Kuniya, "Quantitative Evaluation of Stress Corrosion Crack Growth Behavior on Inconel 600 in a High Temperature Water Environment", Life Prediction of Corrodible Structure,Ⅱ(1991), 1075-1103 .

(118)T. Shoji, Y. Ogaya, “Cathodic protection from stress corrosion cracking of austenitic stainless steel in dilute nacl solution”, Proceedings of Life Pre-diction of Corrodible Structures,? National Assosiation of Corrosion Engineers, (1991), 1021-1039.

(119)庄子哲雄, 進藤裕英, 中島美樹子, 坂根正道, 笠場孝一, 中嶋秀夫, 杉本誠, 吉田清, 辻博史, ｢超伝導マグネットの剛性評価法-実験的検証-｣, 低温工学, 26 , 6 (1991), 467-471.

(120)荻窪裕樹, 橋田俊之, 庄子哲雄, 高橋秀明, ｢引張軟化モデルに基づく花こう岩の封圧依存破壊挙動の数値シミュレーションと実験的検証｣, 資源と素材, 107 , 4 (1991), 195-200.

(121)H. Anzai, J. Kuniya, T. Shoji and K. Yoshida, "Effects of Sensitization and Crevices on Critical Cracking Potential for SCC of Alloy 600", Proceedings of the Fifth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (1991), 219-225.

(122)T. Shoji, K. Yamaki, R. G. Ballinger, and I. S. Hwang, "GRAIN BOUNDARY SEGREGATION AND INTERGRANULAR STRESS CORROSION CRACKING SUSCEPTIBILITY OF AUSTENITIC STAINLESS STEELS IN HIGH TEMPERATURE WATER", Proceedings of the Fifth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (1991), 827-831

(123)進藤裕英, 庄子哲雄, 中島美樹子, 中嶋秀夫, 杉本誠, 吉田清, 辻博史, ｢超電導マグネットの力学的挙動とコイル剛性｣, 低温工学, 27 , 1 (1992), 57-62.

(124)Testuo Shoji, Shin-ichi Moriya, and Ken-ichi Yoshida, "Computer Simulation of Stress Corrosion Cracking Behavior of Reactor Pressure Vessel (RPV) Steels in Light Water Reactor (LWR) Environments in Slow Strain Rate Tests (SSRT)", Computer Modeling in Corrosion, ASTM STP 1154. R. S. Munn, (1992), 44-66.

(125)Jae Kyoo Lim, Tetsuo Shoji, "MICROSTRUCTURAL CHARACTERISTICS AND MECHANICAL PROPERTIES OF POLYMER INJECTION WELD", Proceedings of the Joint ASME / JSME Advances in Electronic Packaging, EEP-2 (1992), 637-648.

(126)庄子哲雄, 吉田謙一, 森聡, ｢高温水中におけるNi基合金の応力腐食割れに関する研究｣, 日本機械学会論文集A編, 58 , 550 (1992), 980-986.

(127)庄子哲雄, 河守裕二, 渡辺豊, 深倉寿一, ｢原子炉圧力容器用鋼の疲労特性と損傷評価｣, 材料, 41 , 469 (1992), 1558-1564.

(128)T. Shoji, Y. Kawamori and Y. Watanabe, "The Evaluation of Fatigue Damage of RPV Steels by Electrochemical Method", Proceedings of the VII International Congress on Experimental Mechanis, II, (1992), 1148-1153.

(129)Jae Kyoo Lim and Tetsuo Shoji, "Study on environmentally assisted cracking of polymer composites by means of SSRT", International Conference on Corrosion-Deformation Interactions CDI'92, (1992), 219-235.

(130)庄子哲雄, 渡辺豊, 岩渕義昌, 斎藤喜久, ｢構造材料の経年劣化とその非破壊計測・評価に関する研究｣, 日本設備管理学会誌, 3 , 3 (1992), 61-70.

(131)岩渕義昌, 藤本隆裕, 渡邊豊, 庄子哲雄, ｢照射誘起応力腐食割れ感受性評価のための基礎的研究｣, 材料と環境, 42 , 1 (1993), 2-8.

(132)Jae Kyoo LIM and Tetsuo SHOJI, "Fiber Orientation and Weld Strength of Short-Glass-Fiber-Filled Polycarbonate", JSME International Journal, Series A, 36, 3 (1993), 319-326.

(133)Jae Kyoo Lim and Tetsuo Shoji, "Fiber Orientation of Polymer Injection Weld and its Strength Evaluation", KSME Journal, 7, 2 (1993), 173-181.

(134)Song Jun-Hee, Lim Jae-Kyoo, Tetsuo Shoji, "A Study on Fracture Toughness Evaluation of Polymer Composite Materials Using Acoustic Emission Technique", Proceedings of Asian Pacific Conference on Fracture and Strength '93 JSME, (1993), 739-744.

(135)S. Moriya, S. Takata, T. Shoji and S. Isaka, "Significance of Loading Mode on Stress Corrosion Cracking", Proceedings of Sixth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (1993), 61-69.

(136)Tetsuo Shoji, Yuji Kawamori, and Yutaka Watanabe, "Nondestructive detection of fatigue damage accumulation of RPV steel", Proceedings of Sixth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (1993), 433-441.

(137)Y.S. Yi, T. Tomobe, Y. Watanabe and T. Shoji, "Non-destructive Evaluation of Thermal Aging Embrittlement of Duplex Stainless Steels", Proceedings of Sixth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (1993), 409-417

(138)T. Shoji and S. Moriya, "Computer simulation of stress corrosion cracking", International Conference on Corrosion -Deformation Interactions CDI'92, (1992), 859-873.

(139)笠場孝一, 庄子哲雄, ｢超伝導マグネットの応力解析と剛性および安定性評価｣, 低温工学, 28, 12 (1993), 671-680.

(140)Yutaka Nishiyama, Kiyoshi Fukaya, Masahide Suzuki, Motokuni Eto, and Tetsuo Shoji, "Electrochemical Evaluation of Thermal Aging Embrittlement of 2 1/4Cr-1Mo Steel for a Nuclear Pressure Vessel", ASTM STP 1204, American Society for Testing and Materials, (1993), 16-26.

(141)Jae Kyoo Lim, Mikiko Nakajima, Tetsuo Shoji, "STUDY ON FIBER ORIENTATION AND LOW CYCLE FATIGUE BEHAVIOR OF POLYMER INJECTION WELDS", Proceedings of 9th International Conference of Composite Materials, (1993), 205-211.

(142)T. HASHIDA, H. OGHIKUBO, H. TAKAHASHI and T. SHOJI, "Numerical simulation with experimental verification of the fracture behavior in granite under confining pressures based on the tension-softening model", International Journal of Fracture, 59, (1993), 227-244.

(143)小島隆, 庄子哲雄, 高橋秀明, ｢模擬地熱環境における花崗岩の応力腐食割れ特性｣, 日本地熱学会誌, 16 , 3 (1994), 311-326.

(144)森谷信一, 庄子哲雄, ｢SSRTおよび定荷重下の高温高圧水中応力腐食割れにおけるき裂先端ひずみ速度の定量的評価に関する研究｣, 日本機械学会論文集A編, 60 , 579 (1994), 2573-2580.

(145)金壎, 庄子哲雄, ｢集中誘導型交流電位差法に関する研究-欠陥寸法の評価精度および周波数依存性の検討-｣, 材料, 43 , 494 (1994), 1482-1488.

(146)Y. Nishiyama, K. Fukaya, M. Suzuki, M. Eto, T. Shoji, "Electrochemical monitoring of aging embrittlement of 21/4Cr-1Mo steel for gas-cooled reactor pressure boundary components", Theoretical and Applied Fracture Mechanics 21, (1994), 51-57.

(147)Mikiko Nakajima and Tetsuo Shoji, "Application of Impedance Spectroscopy to Evaluate Temperature, Stress and Internal Structure in Electronic Packages", Mechanics and Materials for Electronic Packaging, AMD- 195, (1994), 133-139.

(148)Tohru Nakaya and Tetsuo Shoji, "FRACTURE TOUGHNESS OF YBa2Cu3O7-x SUPERCONDUCTOR CONTAINING Y2BaCuO5 AND AG PREPARED BY MPMG PROCESS", Mechanics and Materials for Electronic Packaging, AMD- 193, (1994), 39-45.

(149)T. Shoji and S. Moriya and H. Arai and M. Higashi, "IMPROVEMENT OF PREDICTIVE CAPABILITY OF ENVIRONMENTALLY ASSISTED CRACKING BY MEANS OF COMPUTER SIMULATION OF CRACK PROPAGATION", Proceedings of Fracture Mechanics Applications ASME 1994, PVP-287/MD-47, (1994), 107-113.

(150)中川理, 庄子哲雄, 笠場孝一, 西条哲弘, ｢超伝導量子干渉素子によるYBa2Cu3O7-x 酸化物超伝導体の微視破壊挙動に関する研究｣, 低温工学, 29, 7 (1994), 298-303.

(151)笠場孝一, 庄子哲雄, 柴田直樹, 中川理, 中島秀夫, 杉本誠, ｢超伝導マグネット 線の励磁過程におけるひずみ挙動｣, 低温工学, 29, 8 (1994), 367-374.

(152)中原正大, 庄子哲雄, ｢極値解析データを基にした冷却水環境における炭素鋼製熱交換器の寿命予測｣, 材料と環境, 43, 11 (1994), 624-631.

(153)駒村貴幸, 庄子哲雄, ｢2.25Cr-1Mo鋼の水素助長割れ下限界応力拡大係数とき裂先端の塑性変形に関する研究｣, 日本機械学会論文集A編, 61, 582 (1995), 283-288.

(154)金壎, 庄子哲雄, ｢集中誘導型交流電位差法に関する研究-探触子改良および2次元表面欠陥評価への適用-｣, 材料, 44, 500 (1995), 669-674.

(155)柴田近, 佐々木巌, 内藤広郎, 松野正紀, 渡邊豊, 庄子哲雄, ｢迷走神経幽門枝切離の胃幽門輪運動に対する影響-幽門輪運動の新しい測定法を用いて-｣, 外科治療,72, 6 (1995), 1121-1122.

(156)中島美樹子, 庄子哲雄, 蓮田久, ｢インピーダンス･スペクトロスコピー法による炭化珪素の材質・欠陥の非破壊評価｣, 日本機械学会論文集A編, 61, 585 (1995), 940-945.

(157)金壎, 庄子哲雄, ｢集中誘導型交流電位差法による傾斜欠陥の評価｣, 非破壊検査, 44, 9 (1995), 730-735.

(158)高橋和彦, 庄子哲雄, ｢交流電位差法による焼結鍛造材未焼結部の非破壊検査｣, 非破壊検査, 44 , 9 (1995), 736-743.

(159)T. Shoji, Y. Watanabe, S. Moriya and S. Takata, "Effects of loading modes on environmentally assisted cracking of pressure vessel steels in high temperature water", Fatigue and Crack Growth: Environmental Effects, Modeling Studies, and Design Considerations, PVP- 306, (1995), 29-33.

(160)Yutaka Watanabe and Tetsuo Shoji, "CREEP LIFE EVALUATION OF 2.25Cr-1Mo STEEL COMPONENTS AND IN-SITU NDE BY ELECTROCHEMICAL TECHNIQUE", Fitness-For-Service and Decisions for Petroleum and Chemical Equipment, PVP- 315, (1995), 397-405.

(161)T. Shoji, S. Suzuki, R. G. Ballinger, "Theoretical Prediction of SCC Growth Behavior　-　Threshold and Plateau Growth Rate-", Proceedings of Seventh International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, 1, (1995), 881-889.

(162)Koo Kab Chung, Jae Kyu Lim, Shinichi Moriya, Yutaka Watanabe, Tetsuo Shoji, "Lead Induced Stress Corrosion Cracking of Alloy 690 in High Temperature Water", Proceedings of Seventh International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor, (1995), 233-244.

(163)S. Suzuki and T. Shoji, "SCC INITIATION AND PRPPAGATION STUDY OF SUS 304 IN HIGH TEMPERTURE WATER BY ACPD", Proceedings of International Symposium on Plant Aging and Life Prediction of Corrodible Structures, (1995), 379-387.

(164)中原正大, 庄子哲雄, ｢化学装置で用いられたタンタル製部材の水素ぜい化の非破壊的評価と寿命管理｣, 日本機械学会論文集A編, 62, 595 (1996), 371-377.

(165)M. Nakahara and T. Shoji, "Stress Corrosion Cracking Susceptibility of Nickel-Molybdenum Alloys by Slow Strain Rate and Immersion Testing", Corrosion, 52, 8 (1996), 634-642.

(166)高橋和彦, 庄子哲雄, 中島美樹子, ｢鉄系焼結鍛造材の疲労特性に及ぼす表面欠陥の影響｣, 日本金属学会誌, 60, 9 (1996), 816-825.

(167)渡辺豊, 木村史貴, 庄子哲雄, ｢SUS316鋼の高温高圧水中低ひずみ速度試験における電気化学的ノイズ｣, 材料と環境, 45 , 11 (1996), 667-673.

(168)Y. S. Yi and T. Shoji, "Detection and evaluation of material degradation of thermally aged duplex stainless steels: electrochemical polarization test and AFM surface analysis", Journal of Nuclear Materials, 231, 1-2 (1996), 20-28.

(169)Y. S. Yi, T. Shoji, "Quantitative evaluation of material degradation of thermally aged duplex stainless steels using chemical immersion test", Journal of Nuclear Materials, 240, 1 (1996), 62-69.

(170)M. L. Saucedo-Munoz, Y. Watanabe, T. Shoji and H. Takahashi, "An Electrochemical Study of Thermal Degradation in Austenitic Stainless Steels", Proceedings of Asian Pacific Conference for Fracture and Strength '96, (1996), 837-842.

(171)Toshio KONO, Hayato SHINOHARA, Nakamichi YAMASAKI, Hideaki TAKAHASHI, Toshiyuki HASHIDA, Kinji TAMAGAWA and Tetsuo SHOJI, "APPLICATION OF ACOUSTIC EMISSION TECHNIQUE FOR OPTIMIZATION OF WOOD DRYING METHOD BY USE OF CARBON DIOXIDE", Progress in Acoustic Emission VIII, The Japanese Society for Non-Destructive Inspection, (1996), 327-332.

(172)H. Shinohara, T. Kono, N. Yamasaki, H. Takahashi, T. Hashida and T. Shoji, "Development of a Cut End Air Pressurization under Hydrothermal Conditions and Penetration Characteristics", Proceedings of The Second International Conference on Solvothermal Reactions, (1996), 18-20.

(173)T. Shoji, S. Mori, H. Anzai and J. Kuniya, “Quantitative Evaluation of Stress Corrosion Crack Growth Behavior on Inconel 600 in a Simulated LWR Environment”, Life Prediction of Corrodible Structure, (1997), 23-26

(174)S. Moriya and T. Shoji, "SURFACE CRACK GROWTH BEHAVIOR OF PRESSURE VESSEL STEELS IN OXYGENATED HIGH TEMPERATURE WATER", Proceedings of International Symposium on Plant Aging and Life Prediction of Corrodible Structures, (1997), 937-942.

(175)Shuichi Inagaki, Juichi Fukakura and Matuso Miyazaki, Tetsuo Shoji, "CATHODIC PROTECTION TECHNIQUE FOR POWER PLANT CONDENSER USING NUMERICAL METHOD", Proceedings of International Symposium on Plant Aging and Life Prediction of Corrodible Structures, (1997), 827-834.

(176)T. Shoji, H. Kim, T. Maeda, Y. Sato and Y. Watanabe, "A NOVEL NONDESTRUCTIVE INSPECTION  AND MONITORING TECHNIQUE FOR PLANT LIFE MANAGEMENT – INDUCED CURRENT FOCUSING POTENTIAL DROP TECHNIQUE", Proceedings of International Symposium on Plant Aging and Life Prediction of Corrodible Structures, (1997), 371-377.

(177)Y. S. Yi and T. Shoji, "THERMAL AGING EMBRITTLEMENT OF CAST DUPLEX STAINLESS STEELS AND ITS NONDESTRUCTIVE EVALUATION", Proceedings of International Symposium on Plant Aging and Life Prediction of Corrodible Structures, (1997), 343-351,

(178)李鎔宣, 庄子哲雄, ｢集中誘導型交流電位差法による3次元表面き裂の形状計測｣, 日本機械学会論文集A編, 63, 605 (1997), 68-72.

(179)Shin-ichi Komazaki, Yutaka Watanabe, and Tetsuo Shoji, "Nondestructive Evaluation of High Temperature Low-Cycle Fatigue Damage Accumulation in Inconel 718 by Chemical Method", Proceedings of the 4th International Special Emphasis Symposium on Superalloys 718, 625, 706 and Various Derivatives, (1997), 617-628.

(180)村山稔, 庄子哲雄, 渡邊豊, 佐藤康元, ｢集中誘導型交流電位差法による疲労損傷の非破壊評価｣, 日本機械学会論文集A編, 63, 609 (1997), 1119-1125.

(181)駒崎慎一, 渡邊豊, 庄子哲雄, ｢Ni基超合金INCONEL718の高温低サイクル疲労に伴うすべり帯エッチング特性の変化｣, 日本機械学会論文集A編, 63, 611 (1997), 1481-1488.

(182)篠原速都, 河野敏夫, 山崎仲道, 高橋秀明, 橋田俊之, 庄子哲雄, ｢水熱条件下での木口加圧法による含浸前処理技術(第1報)｣, 木材工業, 52, 2 (1997), 61-66.

(183)河野敏夫, 篠原速都, 山崎仲道, 橋田俊之, 庄子哲雄, ｢二酸化炭素を用いたスギ材の乾燥技術の開発｣, ウェイスト･リソース, 35 (1997), 5-13.

(184)篠原速都, 河野敏夫, 山崎仲道, 橋田俊之, 庄子哲雄, ｢木口含浸水熱法による含浸前処理技術｣, ウェイスト･リソース, 35 (1997), 14-22.

(185)S. KOMAZAKI and T. SHOJI, "Formation of the Al-Rich Phase on Grain Boundary and the Creep Damage Mechanism in Directionally Solidified Ni-Base Superalloy", Metallurgical and Materials Transactions A, 28A (1997), 1945-1949.

(186)S. Suzuki, T. Shoji, "CHARACTERISTICS OF THE SCC SURFACE CRACK PROPAGATION IN THE LOW K REGION IN OXYGENATED HIGH TEMPERATURE WATER", Proceedings of the Eighth International Symposium on ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMS-WATER REACTORS, (1997), 685-694.

(187)S. Suzuki, T. Shoji, Yong-Sun Yi, Jeong-Ki Kim, "THEORETICAL SCC CRACK GROWTH PREDICTION UNDER VARIOUS LOADING MODES IN HIGH TEMPERATURE WATER", Proceedings of the Eighth International Symposium on ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMS-WATER REACTORS, (1997), 695-703.

(188)S. Suzuki, T. Shoji and Y. S. Yi, “Mechanistics and Mechanisms of Environmentally Assisted Cracking -Formulation of Corrosion Deformation Interactions”, The 2nd International Conference on Corrosion Deformation Interactions, (1997).

(189)Y. Watanabe, T. Shoji, and T. Kondo, "ELECTROCHEMICAL NOISE CHARACTERISTICS OF IGSCC IN STAINLESS STEELS IN PRESSURIZED HIGH-TEMPERATURE WATER", Corrosion, (1998), Paper No.129/1-7, in CD-ROM.

(190)李鎮伊, 庄子哲雄, Dorian MINKOV, 石原道章, ｢磁気光学素子を用いた新しい非破壊探傷｣, 日本機械学会論文集A編, 64, 619 (1998), 825-830.

(191)黒田行郎, 森谷信一, 只野真, 佐藤政裕, 毛呂明夫, 新野正之, 張清杰, 須藤孝幸, 庄子哲雄, ｢熱応力緩和層を有するZrO2 / Ni系遮熱コーティング材料のNTO/MMH燃焼ガス加熱場におけるレーザー改質効果｣, 日本機械学会論文集A編, 64, 621 (1998), 1168-1175.

(192)Jinyi LEE, Hyoungno LEE, Tetsuo SHOJI and Dorian MINKOV, "Application of Magneto-Optical Method for Inspection of the Internal Surface of a Tube", Electromagnetic Nondestructive Evaluation, II (1998), 49-57.

(193)Dorian Minkov and Tetsuo Shoji, "Sizing of 3-D surface cracks using leakage field", Electromagnetic Nondestructive Evaluation, II (1998), 271-279.

(194)D. Minkov, T. Shoji, "Method for sizing of 3-D surface breaking flaws by leakage flux", NDT & E International, 31, 5 (1998), 317-324.

(195)駒崎慎一, 庄子哲雄, 武市徹也, 佐藤実, ｢一方向凝固Ni基超合金のクリープに伴う電気化学的特性の変化と損傷評価｣, 日本機械学会論文集A編, 64, 623 (1998), 1997-2004.

(196)笠場孝一, 庄子哲雄, 中山浩樹, ｢核融合炉超伝導マグネット・ケーブルインコンジット導体の剛性評価法｣, 日本機械学会論文集A編, 64, 623 (1998), 2012-2017.

(197)Y. Ohtani and T. Shoji, "OPTIMIZATION OF FUNCTIONAL DISTRIBUTION OF MATERIALS TO MINIMIZE WEIGHT AND COST OF MACHINE ELEMENTS USING GENETIC ALGORITHM", Proceedings of DETC98, 1998 ASME Design Engineering Technical Conference, (1998), 1-12.

(198)李倫柱, 松田力 , 李鎔宣, 庄子哲雄, ｢高温高圧水中における軽水炉圧力容器用鋼の環境助長割れ内部環境の計測に関する研究｣, 材料と環境, 47 , 12 (1998), 783-788.

(199)Yunju Lee and Tetsuo Shoji, "Quantitative Analysis of Environmentally Assisted Crack Tip Chemistry of reactor pressure vessel steel in high temperature water", Proceedings of EUROCORR'98-THE EUROPEAN CORROSION CONGRESS, (1998).

(200)黒田行郎, 毛呂明夫, 日下和夫, 青木由雄, 新野正之, 三木陽一郎, 下田信之, 寺木潤一, 河内山治朗, 庄子哲雄, ｢熱応力緩和型 ZrO2/Ni 系傾斜機能材料の再生冷却燃焼器への適用に関する研究(その2)-完全FGM型再生冷却エンジンの高空性能試験｣, 日本航空宇宙学会誌, 46 , 539 (1998), 695-704.

(201)Tetsuo Shoji, Shun-ichi Suzuki, K. S. Raja, "Current status and future of IASCC research", Journal of Nuclear Materials, 258-263, 1 (1998), 241-251.

(202)T. Satoh, T. Nakazato, S. Moriya, S. Suzuki and T. Shoji, "Quantitative prediction of environmentally assisted cracking based on a theoretical model and computer simulation", Journal of Nuclear Materials, 258-263, 2 (1998), 2054-2058.

(203)Koichi Kasaba, Takahiro Sano, Souichi Kudo, Tetsuo Shoji, Kazumne Katagiri, Tadashi Sato, "Fatigue crack growth under compressive loading", Journal of Nuclear Materials, 258-263, (1998), 2059-2063.

(204)李鎮伊, 庄子哲雄, ｢磁気光学損傷計測システムによる常磁性材料構造物の非破壊検査に関する基礎研究｣, 日本AEM学会誌, 6, 4 (1998), 337-342.

(205)K. Ogawa, D. Minkov, M. Sato, H. Hashimoto and T.Shoji, "Nondestructive evaluation of degradation of thermal barrier coating by an impedance spectroscopy method", Proceedings of the 9th Asia-Pacific Conference on Nondestructive Testing in conjunction with ASNT's 1998 Spring Conference and 7th Annual Research Symposium, (1998), 43-46.

(206)D. Minkov, T. Shoji, "Sizing of 3-D Surface Cracks with Complex Cross-Sections and Different Orientations Using Leakage Field", Proceedings of 7TH EUROPEAN CONFERENCE ON NON-DESTRUCTIVE TESTING, (1998), 2944-2950.

(207)D. Minkov and T. Shoji, "Sizing of 3-D Surface Cracks by Using Hall Element Probe", The 4th International Workshop on Electromagnetic Non-Destructive Evaluation, Chatou, France, September 17-18, 1998, 74-75, Electromagnetic Nondestructive Evaluation III, 15, (1999), 283-291.

(208)Dorian Minkov and Tetsuo Shoji, "An Improved Method for Sizing of 3-D Surface Cracks Using Leakage Field", ASNT Fall Conference and Quality Testing Show, Nashville, (1998), 180-182.

(209)Dorian Minkov, and Tetsuo Shoji, "SIZING OF 3-D SURFACE BREAKING FLAWS FROM THE DISTRIBUTION OF LEAKAGE FIELD", Proceedings of the Eighth International Symposium on Nondestructive Characterization of Materials, VIII, (1997), 787-792.

(210)Tetsuo Shoji, Yunju Lee, Takeshi Satoh and Shun-ichi Suzuki, "PREDICTION OF ENVIRONMENTALLY ASSISTED CRACKING BEHAVIOR OF STRUCTURAL MATERIAL IN LWR SYSTEMS: THEORY AND EXPERIMENTS", Proceedings of the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, (1998), 201-205.

(211)Yun Ju Lee, Chikara Matsuda, Yong Sun Yi and Tetsuo Shoji, "Measuring the Crack Tip Water Chemistry of Reactor Vessel Steels in Oxygenated High-Temperature Water", Corrosion Engineering, 47, 12 (1998), 935-943.

(212)小川和洋, 庄子哲雄, ｢インピーダンス･スペクトロスコピー法による熱遮へいコーティングの経年劣化評価 (第1報−感度解析によるインピーダンス挙動の検討)｣, 非破壊検査, 48 , 2 (1999), 91-97.

(213)小川和洋, 庄子哲雄, 李鎭伊, ｢インピーダンス･スペクトロスコピー法による熱遮へいコーティングの経年劣化評価 (第2報−セラミックコーティング厚さの評価)｣, 非破壊検査, 48, 2 (1999), 98-105.

(214)李鎭伊,  庄子哲雄, ｢磁気光学効果を用いた非破壊損傷計測システムの開発に関する研究 (第１報−損傷計測システムの開発)｣, 非破壊検査, 48, 3 (1999), 165-171.

(215)李鎭伊, 庄子哲雄, ｢磁気光学効果を用いた非破壊損傷計測システムの開発に関する研究 (第2報−新しいシステムによる遠隔探傷)｣, 非破壊検査, 48, 4 (1999), 231-236.

(216)Kazuhiro Ogawa, Dorian Minkov, Tetsuo Shoji, Minoru Sato, Hideo Hashimoto, "NDE of degradation of thermal barrier coating by means of impedance spectroscopy", NDT&E International, 32 (1999), 177-185.

(217)佐藤雅子, 庄子哲雄, 佐藤康元, 佐藤源之, ｢微小アンテナによる新しい電磁探傷法の開発に関する研究｣, 日本機械学会論文集A編, 65, 632 (1999), 925-931.

(218)T. Shoji, H. Kawakita, T. Yamada, J. Lee, K. Nakatsuka, I. Sasaki, H. Naito and S. Matsuno, "Quantitative Evaluation of Gastric Emptying Behavior by Use of Magnetic Fluid and Pertubation Field Measurements", Proceedings of The Second Japan-US Symposium on Advances in NDT, (1999), 313-316.

(219)Dorian Minkov and Tetsuo Shoji, "Sizing of Small 3-D Surface Cracks by Using Leakage Magnetic Field and Hall Element Probe", Proceedings of The Second Japan-US Symposium on Advances in NDT, (1999), 313-316.

(220)駒崎慎一, 庄子哲雄, 佐藤実, ｢電気化学的手法を用いたガスタービン用Ni基超合金のクリープ寿命評価｣, 日本機会学会論文集A編, 65, 633 (1999), 1147-1155.

(221)Yasumoto Sato and Tetsuo Shoji, "High Sensitivity Inspection of Defects in Welds by Remotely Induced Current Potential Drop Technique", Nondestrucive Characterization of Materials IX, American Institute of Physics, (1999), 107-112.

(222)Shin-ichi Komazaki, Tetsuo Shoji, Iwao Abe, and Ikuo Okada, "Nondestructive Evaluation of Creep Damage and Life Prediction of Ni-Base Superalloy Used in Advanced Gas Turbine Blades by Electrochemical Technique", Nondestrucive Characterization of Materials IX, American Institute of Physics, (1999), 113-119.

(223)Dorian Minkov and Tetsuo Shoji, “Sizing of 3-D Surface Cracks with Varying Width by using Leakage Magnetic Field and Hall Element Probe”, Nondestrucive Characterization of Materials IX, American Institute of Physics, (1999), 220-227.

(224)Y. Wakamatsu, T. Shoji, K. Ogawa and I. Hino, "Health Diagnosis of Functionally Graded C/SiC Coating on C/C Composites", Materials Science Forum, 308-311 (1999), 416-421.

(225)Yoshio Wakamatsu, Tetsuo Shoji, Isao Hino, and Toshihito Saito "OXIDATION DAMAGE PROCESS OF C/C COMPOSITES WITH FUNCTIONALLY GRADED C/SiC COATING", 9th International Space Planes and Hypersonics Systems and Technologies Conference, (1999), AIAA 99-4913, 1-10.

(226)西山裕孝, 深谷清, 鈴木雅秀, 衛籐基邦, 庄子哲雄, ｢高温工学試験研究炉圧力容器用2 1/4Cr-1 Mo鋼の熱時効脆化の電気化学的評価｣, 耐熱金属材料第123委員会研究報告, 32,  2 (1999), 169-175.

(227)T. Shoji, "Theoretical Formulation and Life Prediction of Environmentally Assisted Cracking of Pressure Boundary Components in Light Water Reactor Water Environments", Proceedings of the Asian Pacific Conference for Fracture and Strength’99, (1999),LAI01, in CD-ROM.

(228)Tetsuo SHOJI, Yunju Lee, Krishnan Selva Raja and Guangfu.LI, "Theoretical Prediction of Environmentally Assisted Cracking of Structural Materials in LWR Systems-Threshold and Plateau Growth Behavior-", International Conference on ADVANCED TECHNOLOGY IN EXPERIMENTAL MECHANICS’99, (1999), 408-413.

(229)G. Li, H. Kaneshima, and T. Shoji, "Effects of Minor Elements and Thermal Treatment on EAC of Austenitic Simulated Steels in PWR Primary Water and Implication to IASCC", 9th International Conference on Environmental Degradation on Materials in Nuclear Power Systems-Water Reactors, (1999), 1115-1223.

(230)K. S. Raja, T. Masuda, T. Shoji, and Y. Lee, "Studies on Surface Oxide Films of Stainless Steels Having Simulated Post-Irradiated Grain Boundary Chemistries", 9th International Conference on Environmental Degradation on Materials in Nuclear Power Systems-Water Reactors, (1999), 1125-1123.

(231)Y. Lee, T. Shoji and K. S. Raja, “Evaluation of Crack Tip Solution Chemistry of Low Alloy Steels in Oxygenated High Temperature Water”, 9th International Conference on Environmental Degradation on Materials in Nuclear Power Systems - Water Reactors, (1999), 893-899.

(232)Y. Watanabe, V. Kain, T. Tonozuka, T. Shoji, T. Kondo and F. Masuyama, “EFFECT OF Ce ADDITION ON THE SENSITIZATION PROPERTIES OF STAINLESS STEELS”, Scripta materialia, 42 (2000), 307-312.

(233)Akihiko Hirano, Michiyoshi Yamamoto, Katsumi Sakaguchi, Tetsuo Shoji, Kunihiro Iida, “Effects of Water Flow Rate on Fatigue Life of Carbon Steel in High Temperature Pure Water Environment”, ASME PVP, 410, 2 (2000), 13.

(234)G. F. Li, Y. Kaneshima, and T. Shoji, “Effects of Impurities on Environmentally Assisted Crack Growth of Solution- Annealed Austenitic Steels in PWR Primary Water”, CORROSION, 56, 5 (2000), 460-469.

(235)D. Minkov and T. Shoji, J. Lee, “STUDY OF THE DIPOLE MODEL OF A CRACK”, REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, 19 (2000), 521-528.

(236)Dorian Minkov, Jinyi Lee, and Tetsuo Shoji, “Improvement of the Dipole Model of a Surface Crack”, Materials Evaluation, 58, 31 (2000), 661-666.

(237)Dorian Minkov, Jinyi Lee, Tetsuo Shoji, “Study of crack inversions utilizing dipole model of a crack and Hall element measurements”, Journal of Magnetism and Magnetic Materials, 217 (2000), 207-215.

(238)Dorian Minkov and Tetsuo Shoji, Jinyi Lee, “Experimental study of sizing of surface cracks by using leakage magnetic field and Hall element probe”, PROCEEDING OF THE 2ND INTERNATIONAL CONFERENCE ON EMERGING TECHNOLOGIES IN NDT, (2000), 223-227.

(239)Kazuhiro Ogawa, Tetsuo Shoji, Iwao Abe, and Hideo Hashimoto, “In situ NDT of Degradation of Thermal Barrier Coatings Using Impedance Spectroscopy”, Materials Evaluation, 58, 31 (2000), 476-481.

(240)T. Shoji, K. S. Raja, G. F. Li and Y. J. Lee, Anna Brozova, “CRITICAL PARAMETERS OF ENVIRONMENTALLY ASSISTED CRACKING IN NUCLEAR SYSTEMS”, CORROSION 2000, (2000), in Paper 00190/1-14, in CD-ROM.

(241)Shin-ichi KOMAZAKI, Tetsuo SHOJI and Minoru SATO, “Creep Life Prediction of Ni-Base Superalloy Used in Advanced Gas Turbine Blades by Electrochemical Method”, JSME International Journal, Series A, 43, 2 (2000), 156-165.

(242)小川和洋, 庄子哲雄, 青木久彦, 藤田範生, 鳥越泰治, ｢熱遮へいコーティング(TBC) 材の経年劣化機構解析｣, 日本機械学会論文集A編, 66, 647 (2000), 124-129.

(243)Shin-chi Komazaki, Toshiyuki Hashida, Tetsuo Shoji, and Koshi Suzuki, “Development of Small Punch Tests for Creep Property Measurement of Tungsten-Alloyed 9%Cr Ferritic Steels”, Journal of Testing and Evaluation, (2000),1 249-256.

(244)駒崎慎一, 岸繁男, 庄子哲雄, 千葉秀樹, 鈴木康吏, ｢W強化型9%Crフェライト系耐熱鋼の熱時効ぜい化と電気化学的手法によるその評価｣, 材料, 49, 8 (2000), 919-926.

(245)Maribel L. Saucedo-Munoz, Takashi Matsushita, Toshiyuki Hashida, Tetsuo Shoji, and Hideaki Takahashi, “Development of a Multiple Linear Regression Model to Estimate the Ductile-Brittle Transition Temperature of Ferritic Low Alloy Steels Based on the Relationship Between Small Punch and Charpy V-Notch Tests”, Journal of Testing and Evaluation, (2000), 352-358.

(246)駒崎慎一, 岸繁男, 庄子哲雄, 樋口康二郎, 鈴木康吏, ｢W強化型9%Crフェライト系耐熱鋼のクリープ中の材料劣化に及ぼすLaves相析出の影響｣, 材料, 49, 12 (2000), 1330-1337.

(247)M. L. Saucedo-Munoz, Y. Watanabe, T. Shoji, H. Takahashi, “Effect of microstructure evolution on fracture toughness in isothermally aged austenitic stainless steels for cryogenic applications”, Cryogenics 40, (2000), 693-700.

(248)Kazuhiro OGAWA, Tetsuo SHOJI, Hisahiko AOKI, Norio FUJITA, “Mechanistic Understanding for Degraded Thermal Barrier Coatings”, JSME International Journal, Series A, 44, 4 (2001), 507-513.

(249)駒崎慎一, 庄子哲雄, 千葉秀樹, 阿部宏紀, ｢高効率ガスタービン用Ni基超合金のクリープ条件下でのき裂形劣化挙動｣, 日本機械学会論文集A編, 67 , 65, (2001), 280-287.

(250)小川和洋, 庄子哲雄, 千葉秀樹, 阿部宏紀, 鳥越泰治, ｢高温環境下における熱遮へいコーティング経年の非破壊評価｣, 非破壊検査, 50 , 3 (2001), 164-169.

(251)K. Yagi, K. Tamakawa, D. Minkov, Y. Sato, T. Shoji, “INSPECTION OF METAL SURFACE CONTAINING CRACKS BY SMALL ANTENNAS”, Review of Progress in Quantitative Evaluation, 20 (2001), 338-345.

(252)Dorian Minkov, Jinyi Lee, Tetsuo Shoji, “Determining the sizes of 3-D surface cracks using dipole model of a crack and Hall element measurements”. Journal of The Japan Society of Applied Electromagnetics and Mechanics, 9, 1 (2001), 78-84.

(253)Shin-ichi KOMAZAKI, Shigeo KISHI, Tetsuo SHOJI, Kojiro HIGUCHI and Koshi SUZUKI, “Creep Damage Evaluation of W Alloyed 9%Cr Ferritic Steel by Electrochemical Method”, JORNAL OF THE SOCIETY OF MATERIALS SCIENCE JAPAN, 50, 5 (2001), 503-509.

(254)K.S. RAJA, Y. WATANABE, T. SHOJI, “Effect of Ce doping on passive film electrical resistance of 316 stainless steel exposed to oxygenated pure water at 288 degrees C and its relation to stress corrosion cracking, JOURNAL OF MATERIALS SCIENCE LETTERS, 20, 10 (2001), 965-968

(255)Masao TAKEGOSHI, Yutaka WATANABE, Tetsuo SHOJI, “The In-Situ Measurement of a Local Chemical Reaction by Raman Spectroscopy -Time dependent Enrichment of Chloride Ions on the Surface of 304L Stainless Steel-”, Proceedings of APCFS&ATEM '01, 76-81, (2001).

(256)Akihiko Hirano, Michiyoshi Yamamoto, Katsumi Sakaguchi, Tetsuo Shoji and Kunihiro Iida, “Effects of Water Flow Rate on Fatigue Life of Carbon Steel in Simulated LWR Environment Under Low Strain Rate Conditions”, Journal of Pressure Vessel Technol, 125, 1 (2003), 52-58.

(257)Mitsuo Yamashita, Shinji Tada, Yasumoto Sato, and Tetsuo Shoji, “Nondestructive Evaluation of Fatigue and Creep-Fatigue Damage in 12%Cr Stainless Steel by the Induced Current Focusing Potential Drop Technique”, Journal of Testing and Evaluation, JTEVA, 29, 6 (2001), 544-555.

(258)Masao TAKEGOSHI, Yutaka WATANABE and Tetsuo SHOJI, “The In-Situ Measurement of a Local Chemical Reaction by Raman Spectroscopy- Time Dependent Enrichment of Chloride Ions on the Surface of 304L Stainless Steel-”, Proceedings of APCFS & ATEM ’01, (2001), 76-81.

(259)Qunjia PENG, Junhyun KWON and Tetsuo SHOJI, “Analysis of Crack Growth Kinetics and Crack Tip Strain Rates of Sensitized Type 304 Stainless Steel in Simulated Boiling Water Reactor Environment - Experiments and Theory”, Proceedings of APCFS & ATEM ’01, (2001), 82-87.

(260)G.uangfu LI, Kentaro OHASHI and Tetsuo SHOJI, “Effect of Yield Strength on Stress Corrosion Crack Growth of Stainless Steel in High Temperature Water Environment” Proceedings of APCFS & ATEM ’01, (2001), Sendai, Japan, 88-92.

(261)Shunishi SUZUKI and Tetsuo SHOJI, “SCC Growth Behavior of Surface Cracked Specimens in High Temperature Water”, Proceedings of APCFS & ATEM ’01, (2001), 93-101.

(262)Yoichi TAKEDA, Takashi MATSUDA and Tetsuo SHOJI, “In-Situ Measurement of Contact Electric Resistance of Oxide Films on Sensitised 304 Stainless Steel during Slow Strain Rate Test in High Temperature Water”, Proceedings of APCFS & ATEM ’01, (2001), 114-119.

(263)Jin-Yi LEE, Min-Soo KIM, Moon-Phil KANG, Dae-Jung KIM, Won-Ha CHOE, Tetsuo Shoji, Hiroshi KATO and Kensuke KAGEYAMA, “Development of Magnetic Camera Using 2-D Arrayed Hall Elements”, Proceedings of APCFS & ATEM ’01, (2001), 222-227.

(264)Jinwoo. PARK, Tetsuo SHOJI, “NDE of Fatigue Damage by Induced Current Focusing Potential Drop”, Proceedings of APCFS & ATEM ’01, (2001), 270-274.

(265)Yasumoto SATO, Tetsuo SHOJI, “Estimation of Crack Detectability of Remotely Induced Current Potential Drop Technique Based on POD Curve”, Proceedings of APCFS & ATEM ’01, (2001), 275-280.

(266)Kenichi YAGI, Yasumoto SATO, and Tetsuo SHOJI, “Crack Detection by Means of Electromagnetic Field Measurement with Micro Antennas”, Proceedings of APCFS & ATEM ’01, (2001), 281-285.

(267)Kazuhiro OGAWA, Noritake GOTOH, Tetsuo SHOJI, and Minoru SATO, “High Temperature Oxidation Behavior of the Interface Between Thermal Barrier Coatings and MCrAlY Bond Coatings”, Proceedings of APCFS & ATEM ’01, (2001), 297-302.

(268)Norisuke GOTOH, Kazuhiro OGAWA, Tetsuo SHOJI and Hiroyuki TOGASHI, “Nondestructive Evaluation of High-Temperature Oxidation Behaviour in Thermal Barrier Coatings”, Proceedings of APCFS & ATEM ’01, (2001), 303-308.

(269)Shin-ichi KOMAZAKI, Maribel L. SAUCEDO-MUNOZ, Toru TAKAHASHI, Toshiyuki HASHIDA, Tetsuo SHOJI, “Small Punch Creep Behavior of Service-Exposed SUS 316 HTB Superheater Boiler Tube”, Proceedings of APCFS & ATEM ’01, (2001), 316-321.

(270)Jin-Yi LEE, Moon-Phil KANG, Min-Soo KIM,  Dae-Jung KIM, Won-Ha CHOE and Tetsuo SHOJI, “A Study on Development of Safety Monitoring System for Structure Using a Laser and 2-D Arrayed Photo Sensors”, Proceedings of APCFS & ATEM ’01, (2001), 815-820.

(271)Yoichi TAKEDA and Tetsuo SHOJI, “Change in Work Function of Fatigue Damaged Surface and Its Relevance to Fatigue Failure”, Proceedings of APCFS & ATEM ’01, (2001), 1063-1067.

(272)Yuuya OGAWA, Tetsuo SHOJI, Shin-ichi KOMAZAKI, Kazuhiro OGAWA and Masahide MARUYAMA, “Thermal Aging Embrittlement of Service-Exposed Udimet 520 Gas Turbine Blade”, Proceedings of APCFS & ATEM ’01, (2001), 1086-1090.

(273)Ryosuke KANETANI, Guanfu LI and Tetsuo SHOJI, “Environmentally Assisted Cracking of Simulated Alloys for Grain Boundaries of Irradiated 304 Stainless Steel in High Temperature Water Environments”, Proceedings of APCFS & ATEM ’01, (2001), 1091-1096.

(274)Seok Jin KWON and Tetsuo SHOJI, “A Study of Braking Performance of Brake Disk Pad for Railway Vehicle Considering the Groove Number of Friction Surface”, Proceedings of APCFS & ATEM ’01, (2001), 1103-1108.

(275)Tetsuo Shoji, Yasumoto Sato, Dorian Minkov, Kenichi Yagi, Toshimitsu Baba and Kini Tamakawa, “Development of novel NDE techniques and their significance in the COE program on the physics and chemistry of fracture and failure prevention”, International Journal of Applied Electromagnetics and Mechanics 14, (2001)

(276)Y. SATO, Y. TAKEDA and T. SHOJI, “Non-destructive evaluation of fatigue and creep-fatigue damaged by means of the induced-current focused potential drop technique”, Fatigue and Fracture Engineering Matererials Structure 24, (2001), 885-893.

(277)Yuko SUTO, Koji TANIFUJI, Kimio WATANABE, Toshiyuki HASHIDA, Tetsuo SHOJI and Hideaki Takahashi, “Dependence of the Rate of Granite Dissolution on Temperature and Fluid Velocity under Simulated Geothermal Reservoir Environments”, Journal of Volcanology and Geothermal Research, 24, 1 (2002), 47-56.

(278)Shin-Ichi KOMAZAKI, Shigeo KISHI, Tetsuo SHOJI, Tetsuo KUMAZAWA, Kojiro HIGUCHI and Koshi SUZUKI “Influence of Pre-Aging on Creep Rupture Strength of Tungsten Alloyed 9%Cr Ferritic Steel and Creep Damage Evaluation by Electrochemical Method”, JSME International Journal, Series A, 45, 1 (2002), 30-38.

(279)D. Minkov, Y. Takeda, T. Shoji, J. Lee, “Estimating the sizes of surface cracks based on Hall element measurements of the leakage magnetic fild and a dipole model”, Applied Physics, A 74 (2002), 169-176.

(280)Toshiki KATO, Kazuhiro OGAWA, Tetsuo SHOJI, “Development of Thermal Barrier Coatings for Enhancement of Delamination Resistant Property”, Japan Thermal Spraying Society, 39, 2 (2002), 52-57.

(281)Hidetoshi TAKEDA, Mikiko NAKAJIMA and Tetsuo SHOJI, “Effect of Creep Damage on the Impact Energy-Absorption of Talc-Reinforced Polypropylene Copolymers”, JOURNAL OF THE SOCIETY OF MATERIALS SCIENCE JAPAN, 51, 2 (2002), 233-238.

(282)Maribel L. Saucedo-Munoz, Shin-ichi Komazaki, Toru Takahashi, Toshiyuki Hashida, and Tetsuo Shoji, “Creep property measurement of service-exposed SUS 316 austenitic stainless steel by the small-punch creep-testing technique”, Journal of MATERIALS RESEARCH, 17, 8 (2002), 1945-1953.

(283)Tetsuo Shoji, Yasumoto Sato, Dorian Minkov, Kenichi Yagi, Toshimitsu Baba and Kinji Tamakawa, “Development of novel NDE techniques and their significance in the COE program on the physics and chemistry of fracture and failure prevention”, International Journal of Applied Electromagnetics and Mechanics 14, (2002), 467-476.

(284)Tetsuo Shoji, “Special Issue on Strength and Fracture, and Experimental Mechanics”, JSME International Journal Series A, Solid Mechanics and Material Engineering, 45, 4 (2002), 459.

(285)Oleg SOLONENKO, ALexandr.MIKHALCHENKO, Evgeni KARTAEV, Kazuhiro OGAWA, Tetsuo SHOJI, “Model Studying Zirconia Droplet Deposition and Solidfication on Substrate Under Plasma Spraying: Theory and Experimental Verification”, The Fifth JSME-KSME Fluids Engineering Conference, (2002), in CD-ROM.

(286)Akihiko Hirano, Michiyoshi Yamoto, Katsumi Sakaguchi, Tetsuo Shoji, Kunihiro Iida, “Effects of Water Flow Rate on Fatigue Life of Carbon Steel in Simulated LWR Environmet Undear Low Starin Rate Conditions”, Journal of Pressure Vessel Technology, 125, 1 (2003), 52-58.

(287)Shin-ichi KOMAZAKI, Shigeo KISHI, Tetsuo SHOJI, Hideki CHIBA and Koshi SUZUKI, “Thermal Ageing Embrittlement of Tungsten-Alloyed 9% Cr Ferritic Steels and Electrochemical Evaluation”, MATERIALS SCIENCE RESEARCH INTERNAIONAL, 9, 1 (2003), 42-49.

(288)Qunjia PENG, Guangfu LI and Tetsuo SHOJI, “The Crack Tip Solution Chemistry in Sensitized Stainless Steel in Simulated Boiling Water Reactor Water Studied Using a Microsampling Technique”, Journal of NUCLEAR SCIENCE and TECHNOLOGY, 40, 6 (2003), 397-404.

(289)K.YAGI, N.SATO, Y.SATO, K.TAMAKAWA, D.MINKOV, T.SHOJI, “Detection and evaluation of the depth of surface cracks in conductive materials by using a loop antenna”, Applied Physics, A 77 (2003), 461-468.

(290)Q.J.PENG, H.YAMAUCHI and T.SHOJI, “Investigation of Dendrite-Boundary Microchemistry in Alloy 182 using Auger Election Spectroscopy Analysis”, METALLURGICAL AND MATERIALS TRANSACTIONS A, 34A (2003), 1891-1899.

(291)Zhanpeng LU, Ryosuke KANETANI, Guangfu LI, Qunjia PENG, and Tetsuo SHOJI, “Environmentally Assisted Crack Growth Behavior of Simulated Grain Boundary Materials in PWR Primary Water”, TECHNICAL MEETING ON CORROSION, FATIGUE AND OTHER TIME AND LOAD DEPENDENT DEGRADATION MECHANISMS OTHER THAN IRRADIATION, (2003), in CD-ROM.

(292)Qunjia PENG, Guangfu LI, Tetsuo SHOJI, “MICROSAMPLING OF THE CRACK-TIP SOLUTION IN AUSTENITIC STEELS IN SIMULATED LIGHT WATER REACTOR WATER, Proceedings of the 2003 International Conference on Environmental Degradation of Engineering Materials, (2003), in CD-ROM.

(293)R. Srinivasan, Y. Takeda and Tetsuo Shoji, “pH PROBES FOR CREVICE / CRACK TIP SOLUTION CHEMISTRY AT ELEVATED TEMPERATURE”, Proceedings of the 2003 International Conference on Environmental Degradation of Engineering Materials (EDEM 2003), (2003), No. C3108, in CD-ROM
.
(294)丹野昌利, 小川和洋, 庄子哲雄, 左相玉, 大森明, ｢ボンドコートをレーザー再溶融したTBCの界面強度評価｣, 溶射, 41, 3 (2003), 99.

(295)Tetsuo Shoji, Takumi Yamamoto, Kimio Watanabe and Zhanpeng Lu, “3D-FEM Simulation of EAC Crack Growth Based on the Deformation/Oxidation Mechanism”, Proceedings of 11th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2003), 855-861, Paper No. 71592, in CD-ROM.

(296)Takahiko Sato and Tetsuo Shoji, “Effects of Specimen Size and Thickness on CGR in High Temperature Waters”, Proceedings of 11th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2003), 862-869, Paper No. 71579 , in CD-ROM.

(297)Tetsuo Shoji, “Progress in the mechanistic Understanding of BWR SCC and Its Implication to the Prediction of SCC Growth Behavior in Plants”, Proceedings of 11th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2003), 588-599, Paper No. 81906, in CD-ROM.

(298)Qunjia Peng, Hiroyuki Yamauchi, and Tetsuo Shoji, “Dendrite Boundary Microchemistry in Alloy 182 Weld Metal”, Proceedings of 11th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2003), 1203-1211, Paper No.71582 , in CD-ROM.

(299)Qunjia Peng, Hiroyuki Yamauchi, and Tetsuo Shoji, “Investigation of dendrite-boundary microchemistry in alloy 182 using auger electron spectroscopy analysis”, Metallurgical and Materials Transactions A, 34, 9 (2003), 1891-1899.

(300)Y. Takeda, M. Bojinov, H. Hanninen, P. Kinnunen, T. Latinen, K. Makela, T. Saario, K. Sakaguchi, T. Shoji, P.Sirkia, A.Toivonen, “ Effect of Strain on Electric Properties of Oxide Films Growing on AISI 316L Steel in Simulated BWR Conditions”, Proceedings of 11th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2003), 661-616 , Paper No. 71594, in CD-ROM.

(301)Yonggang Lu, Kazuhiko Sakaguchi, Yosuke Tsujimoto, Nozomi Sakurai, Tetsuya Uchimoto, Makoto Takahashi, Yoshiyuki Takagi, Masaharu Kitamura, Tetsuo Shoji, “A system Safety Benchmark facility for SCC Pipe Tests with High and Low Flow Rate Condition and Some Preliminary Test Results in BWR Environment”, Proceedings of 11th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2003), 805-815, Paper No.60526, in CD-ROM.

(302)Tetsuo Shoji, Guangfu Li, Junhyun Kwon, Shinobu Matsushima and Zhanpeng Lu, “Quantification of Yield Strength Effects on IGSCC of Austenitic Stainless Steels in High Temperature Water”, Proceedings of 11th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2003), 834-844, Paper No.7157 4, in CD-ROM.

(303)Zhanpeng Lu and Tetsuo Shoji, “Environmentally Assisted Cracking Mechanism and Lifetime Prediction of Austenitic Alloys in High Temperature Waters”, Proceedings of The 11th Symposium on Fracture and Fracture Mechanics, (2003), 103-108.

(304)K. Ogawa, N. Gotoh, T. Shoji, “The Influence of thermal Barrier Top Coating on The Initiation and Growth of Thermally Grown Oxide”, Thermal Spray 2003, Advancing the Science and Applying the Technology, ASM International, (2003), 1565-1571.

(305)O. Solonenko, A. Mikhalchenko, E. Kartaev, K. Ogawa, T. Shoji and M. Tanno, “Some Peculiarities of YSZ Splats Formation Under Plasma Spraying of Thermal Barrier”, Proceedings of 16th International Symposium on Plasma Chemistry (ISPC16), (2003).

(306)Seok Jin Kwon, Kazuhiro Ogawa and Tetsuo Shoji, “CHARACTERIZATION OF FRACTURE MECHANICS OF HIGH SPEED TRAIN WHEELSETS DEPENDING ON AGING EFFECTS AND ON THE LOCATION EXAMINED”, Proceedings of International Symposium on Speed-up and Survice Technology for Railway and Maglev Systems, STECH03, (2003), 287-292.

(307)S.J.Kwon, T.Kinji, K.Ogawa & T.Shoji, “Sensitivity of a Stress Measurement Method for Copper Electroplating Using the Effects of Stress Concentration”, Computational Methods and Experimental Measurements XI, (2003), 231-240.

(308)Saucedo-Munoz ML, Komazaki SI, Hashida T, Shoji T, Lopez-Hirata VM, “Application of the small-punch test on the evaluation of cryogenic toughness of isothermally aged austenitic stainless steels”, REVISTA DE METALURGIA, 39, 5 (2003), 378-386.

(309)Oleg Pavlovich Solonenko, Mikhalchenko Alexandr Anatol’yevich, Kartaev Evgenii Vladmirovich, Bondar’ Mariya Petrovna, Kazuhiro Ogawa, Tetsuo Shoji and Masatoshi Tanno, “Theoritical Modeling and Experimental Study of Thermal Barrier Coatings”. Materials Transactions, MATERIALS TRANSACTIONS, 44, 11 (2003), 2311-2321.

(310)Akira Kai, Masao Takegoshi and Tetsuo Shoji, “In Situ Micro Raman Spectroscopy for Characterization of Oxide Film Formed on the New Surface and for Measurements of the Stress of Oxide Film Formed on 340L Stainless Steel”, Key Engineering Materials, 261-263 (2004), 913-918.

(311)Zhanpeng Lu, Yoichi Takeda and Tetsuo Shoji, “Effects of Environmental Factors on Electronic Properties of Interfacial Oxide Film on 304L Stainless Steel in High Temperature Pure Water”, Key Engineering Materials, 261-263 (2004), 919-924.

(312)Y. Takeda, M. Bojinov, H. Hanninen, P. Kunnunen, T. Laitinen, K. Makela, T. Saario, K. Sakaguchi, T. Shoji, P. Sirkia and A. Toivonen, “Comparison of the Electric Properties and ESCA Result of Oxide Films Formed on AISI 316L Steel in Simulated BWR Conditions During SSRT”, Key Engineering Materials, 261-263 (2004), 925-930.

(313)Q. J. Peng and T. Shoji, “Effects of Dissolved Hydrogen on the Primary Water Stress Corrosion Cracking Behavior of Alloy 600 at 325℃”, Key Engineering Materials, 261-263 (2004), 943-948.

(314)Y. Lu, K. Sakaguchi and T. Shoji, “Stress Corrosion Cracking of Stainless Steel Pipe Weldments in BWR Environment”, Key Engineering Materials, 261-263 (2004), 1017-1022.

(315)K. Watanabe, T. Yamamoto and T. Shoji, “3D-FEM Simulation for EAC Crack Growth Evaluation and its Implication to Specimen Size Effects on Crack Growth Behavior”, Key Engineering Materials, 261-263 (2004), 1023-1030.

(316)S. Rangarajan, Douglas Shukert, Y. Takeda, K. Sakaguchi and Tetsuo Shoji, “SSRT-CER and Impedance Measurements of Oxide Films on Stainless Steels in Oxygenated High Temperature Water”, Key Engineering Materials, 261-263 (2004), 993-998.

(317)Vlandimir Cihal, Rudolf Stefec, Tetsuo Shoji, Yutaka Watanabe and Vivenakand Kain, “Electrochemical Potentiodynamic Reactivation: Developmet and Applications of the EPR Test”, Key Engineering Materials, 261-263 (2004), 855-864.

(318)S. Taketomi, A.T. Yokobori,Jr. and T. Shoji, “Mechanism of Hydrogen Embrittlement Due to the interaction of a Crack, Moving Dislocations and Hydrogen Cluster”, Key Engineering Materials, 261-263 (2004), 937-942.

(319)T. Baba, K. Ogawa and T. Shoji, “Development of Novel Non-Destructive Inspection Technique Using High-Frequency Signal Transmission Characteristics”, Key Engineering Materials, 261-263 (2004), 949-954.

(320)Hirano A, Yamamoto M, Sakaguchi K, Shoji T, Iida K, “Effects of water flow rate on fatigue life of carbon steel in simulated LWR environment under low strain rate conditions”, Journal of Pressure Vessel Technol, 25, 1 (2003), 52-58.

(321)Shun-ichi Komazaki, Shigeo Kishi, tetsuo Shoji, Hideki Chiba and Koshi Suzuki, “Thermal aging embrittlement of tungsten-alloyed 9%Cr ferritic steels and electrochemical evaluation”, Materials Science Research International, 9, 1 (2003), 42-49.

(322)K.S. Raja, T. Shoji, “Semiconducting properties of surface oxide films of pure iron, nickel and chromium metals in pure water at 288℃”, JOURNAL OF MATERIALS SCIENCE LETTERS, 22 (2003), 1347-1349.

(323)Hirotaka Sato, Michihiro Kitahara and Tetsuo Shoji, “Multiple Scattering of Elastic Waves in a Fiber-Reinforced Cementitious Composite”, Key Engineering Materials, 261-263 (2004), 975-980.

(324)Hiroyuki Yamauchi, Q.J. Peng and T. Shoji, “Measurement of Compositional Profile of ID Facets by FEG-AES and its Relevance to IDSCC of Alloy 182 in a Simulated BWR Environment”, Key Engineering Materials, 261-263 (2004), 1011-1016.

(325)S. J. Kwon, K. Ogawa and T. Shoji, “Aging of High Speed Train Wheelsets and its Quantitative Characteristics Based on Fracture Mechanics for Optimization of In-Service Inspection”, Key Engineering Materials, 261-263 (2004), 1037-1042.

(326)Masatoshi Tanno, Kazuhiro Ogawa and Tetsuo Shoji, “Effect of Cerium and Silicon Additions to MCrAIY on the High-Temperature Oxidation Behavior and Bond Strength of Thermal Barrier Coatings”, Key Engineering Materials, 261-263 (2004), 1061-1066.

(327)Q. J. Peng, J. Kwon, T. Shoji, “Development of a fundamental crack tip strain rate equation and its application to quantitative prediction of stress corrosion cracking of stainless steels in high temperature oxygenated water”, Journal of Nuclear Materials, 324, 1 (2004), 52-61.

(328)Shenchun WANG, Yoichi TAKEDA, Tetsuo SHOJI, and Nobuaki KAWAGUCHI, “Observation of the Oxide Film Formed in High Temperature Water by Applying Electroless Ni-P Coating”, Journal of Nuclear Science and Technology, 41, 7 (2004), 777-779.

(329)Kazuhiro Ogawa, Toshimitsu Baba, Mikiko Suzuki and Tetsuo Shoji, “Nondestructive Evaluation of Defects in Conductive and Non-Conductive Materials by High-Frequency Signal Transmission Characteristics Technique”, Key Engineering Materials, 270-273 (2004), 1712-1718.

(330)Jinyi Lee, Do-Won Seo and Tetsuo Shoji, “Numerical Consideration of Magnetic Camera for Quantitative Nondestructive Evaluation”, Key Engineering Materials, 270-273 (2004), 630-635.

(331)Jinyi Lee, Tetsuo Shoji, Do-Won Seo, “Theoritical Consideration of nondestructive Testing by use of Vertical Magnetization and Magneto-Optical Sensor”, KSME International Journal, 18, 4 (2004), 640-648.

(332)Tetsuo Shoji, Zhanpeng Lu, Qunjia Peng, Shengchun Wang, Yoichi Takeda, Akira Kai, “MODELING AND QUANTITATIVE PREDICTION OF ENVIRONMENTALLY ASSISTED CRACKING BASED UPON A DEFORMATION-OXIDATION MECHANISM”, PVP-479, Residual Stress, Fractureand Stress Corrosion Cracking, (2004), PVP2004-2662, 175-184.

(333)Zhanpeng Lu, Tetsuo Shoji, “UNIFIED INTERPRETATION OF CRACK GROWTH RATES OF NI-BASE ALLOYS IN LWR ENVIRONMENTS”, PVP-475, Flaw Evaluation, Service Experience, and Materials for Hydrogen Service, (2004), PVP2004-2558, 175-185.

(334)Ken Suzuki, Yo-ichi Takeda, Zhanpeng Lu and Tetsuo Shoji, “Computational Chemistry Study of Accelerated Oxidation Mechanism of IGSCC of Structural Materials in LWR Environments and Theoretical Design of SCC Resistant Alloys”, Proceedings of ICAPP ‘04, (2004), Paper 4227, 1937-1941.

(335)Shengchun Wang, Nobuaki Kawaguchi and Tetsuo Shoji, “Effects of Ce, Y and Mo Addition on the Stress Accelerated Oxidation of Austenitic Stainless Steel in Oxygenated High Temperature Water”, Proceedings of ICAPP ‘04, Pittsburgh, PA USA, June 13-17,(2004), Paper 4228, 2046-2054,.

(336)Takashi Kasuya, Takeshi Okuyama, Nozomu Sakurai, Haoyu Huang, Tetsuya Uchimoto, Toshiyuki Takagi, Yonggang Lu and Tetsuo Shoji, “In-situ Eddy Current Monitoring under High Temperature Environment”, International Journal of Applied Electromagnetics and Mechanics, 20 (2004), 163-170.

(337)K. S. RAJA, T. SHOJI, “Effect of pre-oxidation and corrosion potential on electronic properties of passive films on Ni-Cr-Fe alloys in pure water at 288℃”, JOURNAL OF MATERIALS SCIENCE, 39, 3 (2004), 1033-1036.

(338)Kwon SJ, Shoji T, “Crack detection in press fit railway axle using induced current focusing potential drop technique”, Key Engineering Materials, 270-273 (2004), 1002-1007.

(339)J Dzugan, Y Ito, S Kwon, K Ogawa, T Shoji, “Fracture toughness tests of wheelset materials used in the Japanese Shinkansen express trains”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 218, 4 (2004), 263-271.

(340)Tetsuo Shoji, Zhanpeng Lu, He Xue, Kentaro Yoshimoto, Mikiro Itow, Jiro Kuniya, Kimio Watanabe, “Quantification of the effects of crack tip plasticity on environmentally-assisted crack growth rates in LWR environments”, Proceedings of the Second International Conference on Environment-induced Cracking of Metals (EICM-2), (2004), 107-122.

(341)Tetsuo Shoji, “Development of a fundamental crack tip strain rate equation and its application to quantitative prediction of stress corrosion cracking”, Corrosion 2005, (2005).

(342)S. Wang, T. Shoji and N. Kawaguchi, “Initiation of Environmentally Assisted Cracking in High Temperature Water”, Corrosion, 61, 2 (2005), 137-144.

(343)Shengchun WANG, Yoichi TAKEDA, Kazuhiko SAKAGUCHI and Tetsuo SHOJI, “Cracking Paths During Initiation of Environmentally Assisted Cracking in High Temperature Water”, Journal of Nuclear Science and Technology, 42, 7 (2005), 670-672.

(344)Yo-ichi Takeda, Hiroyuki Yamauchi, Qunjia Peng and Tetsuo Shoji, “Effect of Grain Boundary Microchemistry on IGSCC of Alloy 132 in a Simulated BWR Environment”, Key Engineering Materials, 297-300 (2005), 986-992.

(345)Y.H. Lu, Q.J. Peng, T. Sato and T. Shoji, “An ATEM study of oxidation behavior of SCC crack tips in 304L stainless steel in high temperature oxygenated water”, Journal of Nuclear Materials, 347 (2005), 52-68.

(346)Shin-ichi Komazaki, Tetsuo Shoji, Kazumune Takamura, “Evaluation of Thermal Aging Embrittlement in Directionally Solidified Ni-Base Superalloy by Small Punch Test”, JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, 127 (2005), 476-482.

(347)Akira Kai, Yuichiro Terayama, Kazuhiro Ogawa, Tetsuo Shoji, “Characterization of Oxide Film Formed on Austenitic Stainless Steel by in-situ Micro Raman Spectroscopy”, Key Engineering Materials, 297-300 (2005), 2806-2812.

(348)Ji Nyi Lee, Ji Seong Hwang, Tetsuo Shoji and Jae Kyu Lim, “Modeling of Characteristics of Magneto-Optical Sensor Using FEM and Dipole Model for Nondestructive Evaluation”, Key Engineering Materials, 297-300 (2005), 2022-2027.

(349)Hirotaka Sato, Michihiro Kitahara, Tetsuo Shoji, “Boundary Element Analysis of Multiple Scattering Waves in High Performance Concretes”, Journal of Applied Mechanics-Transactions of the ASME, 72, 2 (2005), 165-171.

(350)R. Ishibashi, T. Horiuchi, J. Kuniya, M. Yamamoto, S. Tsurekawa, H. Kokawa, T. Watanabe, and T. Shoji, “Effect of grain boundary character distribution on stress corrosion cracking behavior in austenitic stainless steels”, Materials Science Forum, 475-479 (2005), 3863-3866.

(351)J Dzugan, Y Ito, S Kwon, K Ogawa and T Shoji, “Fracture toughness tests of wheelset materials used in the Japanese Shinkansen express trains”, Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials Design and Applications, 218 (2004), 263-271.

(352)Jerome Isselin, Sheng Chun Wang, Shinichi Komazaki, Tetsuo Shoji, “Development of Small Punch Test for EAC Evaluation”, Key Engineering Materials, 297-300 (2005), 980-985.

(353)Qunjia Peng, Tetsuo Shoji, Stefan Ritter, Hans-Peter Seifert, “SCC BEHAVIOR IN THE TRANSITION REGION OF AN ALLOY 182-SA 508 CL.2 DISSIMILAR WELD JOINT UNDER SIMULATED BWR-NWC CONDITIONS”, Proceedings of the 12th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, (2005), 589-599.

(354)Yuzuru ITO, Zhanpeng LU, Hideo MIURA, Toshio YONEZAWA and Tetsuo SHOJI, “Effect of Temperature on the Microscopic Appearance on the Fracture Surface of Alloy 690TI under SSRT Testing”, JSME International Journal, Series A, 49, 3 (2006), 355-362.

(355)S. Wang, Y. Takeda, K. Sakaguchi, T. Shoji, “Role of Work-Hardened Surface Layer in Initiation of Environmentally Assisted Cracking in High-Temperature Water”, Corrosion, 62, 8 (2006), 651-656.

(356)Zhanpeng Lu, Tetsuo Shoji, “Unified Interpretation of Crack Growth Rates of Ni-Base Alloys in LWR Environments”, Journal of Pressure Vessel Technology, 128, 3 (2006), 318-327.

(357)Kazuhiro Ogawa, Oleg P. Solonenko, Yuji Ichikawa, Masatoshi Tanno, Vladimir A. Poluboyarov, Anatoly N. Cherepanov, Andrei E. Lapin, and Tetsuo Shoji, “Application of Mechanically Ground and Refractory Ultra-Fine Powders For Thermal Barrier Coatings”, Proceedings of 18th International Conference on Surface Modification Technologies XVII, (2006), 45-51.

(358)Mikiko Suzuki, Kazuhiro Ogawa and Tetsuo Shoji, “Quantitative NDE of Surface Cracks in Ceramic Materials by means of a High-Frequency Electromagnetic Wave”, Materials Transactions, 47, 6 (2006), 1605-1610.

(359)K. Ogawa, K. Ito, T. Shoji, H. Tezuka, and H. Kato, “Effects of Ce and Si Additions to CoNiCrAlY Bond Coat Materials on Oxidation Behavior and Crack Propagation of Thermal Barrier Coatings”, Journal of Thermal Spray Technology, 15, 4 (2006), 640-651.

(360)佐藤康元，渥美健夫，庄子哲雄,　｢電位差法を用いた裏面応力腐食割れ進展の連続モニタリング｣, 日本機械学会論文集A編, 72 , 724 (2006), 139144.

(361)Hoon Kim and Tetsuo Shoji, “The Detection of Defects in Paramagnetic Materials Using Locally Focused Electromagnetic Field Technique”, Key Engineering Materials, 270-273 (2004), 625-629.

(362)佐藤康元，庄子哲雄,　｢遠隔誘導型電位差法による裏面き裂計測と有限要素法解析｣, 日本機械学会論文集A編, 72 , 723 (2006), 117-122.

(363)Yoichi Takeda, Tetsuo Shoji, Martin Bojinov, Petri Kinnunen, Timo Saario, “In situ and Ex situ Characterisation of Oxide Film Formed on Strained Stainless Steel Surface in High-temperature Water”, Applied Surface Science, 252, 24 (2006), 8580-8588.

(364)Jin Yi Lee, Ji Seong Hwang, Tetsuo Shoji, “Numerical analysis of magneto-optical eddy current imaging using FEM”, Key Engineering Materials, 321-323 (2006), 1451-1456.

(365)Tetsuo Shoji, Zhanpeng Lu, Yo-ichi Takeda, Yasumoto Sato, “Towards Proactive Materials Degradation Management in NPP-Today and Future”, Proceedings of 14 Asia Pacific Corrosion Control Conference (14APCCC), Plenary speech, (2006).

(366)D. Seo, K. Ogawa, T. Shoji, S. Murata, “Experimental Investigation of Isothermal Degradation of VPS NiCrAlY Overlay Coating in Simulated Gas Turbine Environment”, Journal of Thermal Spray Technology, (2007).

(367)Do Won Seo, Kazuhiro Ogawa, Tetsuo Shoji, Shozo Murata, Jinyi Lee, “Comparative study on oxidation resistant compositions of selected MCrAlY overlay coatings under isothermal exposure”, The 2nd Asian Thermal Spray Conference (ATSC2006), 68-69.

(368)D. Seo, K. Ogawa, M. Tanno, T. Shoji, S. Murata, “Influence of heat exposure time on isothermal degradation of plasma sprayed CoNiCrAlY coatings”, Surface & Coatings Technology, 201, 15 (2007), 7952-7960.

(369)Tetsuo Shoji, Zhanpeng Lu, Yoichi Takeda, ”UNDERSTANDING THE THRESHOLD CONDITIONS FOR STRESS CORROSION CRACKING IN LIGHT WATER REACTOR ENVIRONMENTS BASED ON THE DEFORMATION/OXIDATION MECHANISM”, Proceedings of PVP2007, 2007 ASME Pressure Vessels and Piping Division Conference, (2007), PVP2007-26183.

(370)Akihiko Hirano, Katsumi Sakaguchi, Tetsuo Shoji, “EFFECTS OF WATER FLOW RATE ON FATIGUE LIFE OF STRUCTURAL STEELS under SIMULATED BWR ENVIRONMENT”, Proceedings of PVP2007, 2007 ASME Pressure Vessels and Piping Division Conference, (2007), PVP2007-26423.

(371)Qunjia Peng, Tetsuo Shoji, Hiroyuki Yamauchi, Yoichi Takeda, “Intergranular environmentally assisted cracking of Alloy 182 weld metal in simulated normal water chemistry of boiling water reactor”, Corrosion Science, 49, 6 (2007), 2767-2780.

(372)Yasumoto Sato, Xue He, Yoichi Takeda, and Testuo Shoji, “Development of a Stress Corrosion Cracking Test Methodology Using Tube-shaped Specimens”, Journal of Testing and Evaluation, 35, 3 (2007), 254-258.

(373)Y. Sato, T. Atsumi, T. Shoji, “Continuous monitoring of back wall stress corrosion cracking growth in sensitized type 304 stainless steel weldment by means of potential drop techniques”. International Journal of Pressure Vessels and Piping, 84, 5 (2007), 274-283.

(374)Yuji, Ichikawa, Sophie Barradas, François Borit, Vincent Guipont, Michel Jeandin, Mariette Nivard, Laurent Berthe, Kazuhiro Ogawa and Tetsuo Shoji, “Evaluation of Adhesive Strength of Thermal-Sprayed Hydroxyapatite Coatings Using the LAser Shock Adhesion Test (LASAT)”, Materials Transactions, 48, 4 (2007), 793-798.

(375)He Xue, Tetsuo Shoji, “Quantitative Prediction of EAC Crack Growth Rate of Sensitized Type 304 Stainless Steel in Boiling Water Reactor Environments Based on EPFEM”, Journal of Pressure Vessel Technology - Transactions of the ASME, 129 (2007), 460-467.

(376)Tetsuo Shoji, Yuzuru Ito, Zhanpeng Lu, Toshio Yonezawa, “MECHANISTIC UNDERSTANDING OF LOW TEMPERATURE CRACK PROPAGATION FOR ALLOY 690 IN HYDROGENATED WATER“, Proceedings of 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, (2007), 1-11, in CD-ROM.

(377)Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Yuzuru Ito, Akira Kai, Nobuhisa Tsuchiya, “EFFECTS OF ELECTROCHEMICAL POTENTIAL ON CRACK GROWTH RATE OF 316L WELD HAZ AND WELD METAL MATERIAL IN 288oC PURE WATER”, Proceedings of 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, (2007), 1-16, in CD-ROM.

(378)Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Yuzuru Ito, Akira Kai and Seiya Yamazaki “MEMORY EFFECTS AND STEADY STATE GROWTH KINETICS FOR STRESS CORROSION CRACKING OF A COLD WORKED 316L STAINLESS STEEL IN HIGH TEMPERATURE PURE WATER”, Proceedings of 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, (2007), 1-16, in CD-ROM.

(379)Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Yuzuru Ito, Seiya Yamazaki and Nobuhisa Tsuchiya, “EFFECTS OF LOADING MODE AND TEMPERATURE ON STRESS CORROSION CRACKING GROWTH BEHAVIOR OF STRAIN-HARDENED 316L STAINLESS STEELS IN OXYGENATED PURE WATER”, Proceedings of 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, (2007), 1-20, in CD-ROM.

(380)Z. Lu, T. Shoji, Y. Takeda, A. Kai, and Y. Ito, “Effects of Loading Mode and Temperature on Stress Corrosion Crack Growth Rates of a Cold-Worked Type 316L Stainless Steel in Oxygenated Pure Water”, Corrosion, 63, 11 (2007), 1021-1032.

(381)Dowon Seo, Kazuhiro Ogawa, Tetsuo Shoji, and Shozo Murata, “Effect of Particle Size Distribution on Isothermal Oxidation Characteristics of Plasma Sprayed CoNi- and CoCrAlY Coatings”, Journal of Thermal Spray Technology, 16, 5-6 (2007), 954-966.

(382)Yasumoto Sato, Takeo Atsumi, Tetsuo Shoji, “Application of induced current potential drop technique for measurements of cracks on internal wall of tube-shaped specimens”, NDT & E International, 40, 7 (2007), 497-504.

(383)Takahiro Niki, Kazuhiro Ogawa and Tetsuo Shoji, “Segregation of Alloying Elements of Directionally Solidified Nickel Based Superalloy CM247LC during Creep Degradation Process”, Key Engineering Materials, 353-358 (2007), 537-540.

(384)D. Seo, K. Ogawa, Y. Suzuki, K. Ichimura, T. Shoji, and S. Murata, “Integral Layer Profile Analysis Investigation of High Temperature Oxidation of MCrAlY Coatings”, Proceedings of International Gas Turbine Congress 2007 Tokyo (IGTC07), (2007), 1-7, Gas Turbine Society of Japan, TS-080.

(385)D. Seo, K. Ogawa, Y. Suzuki, K. Ichimura, T. Shoji, Shozo Murata, “Time-dependent Transition of Chemical Elements in Plasma Sprayed MCrAlY Coatings under High Temperature Oxidation”, Proceedings of 21st International Conference on Surface Modification Technologies XXI (SMT21), (2007), 1-8, TS-3-2.

(386)D. Seo, K. Ogawa, T. Shoji, S. Murata, “Effect of Particle Size Range on Thermally Grown Oxide Scale Formation on Vacuum Plasma Sprayed CoNi- and CoCrAlY Coatings”. The 2007 International Thermal Spray Conference (ITSC2007), (2007), 948-953, ASM International, Paper No. 15657.

(387)D. Seo, K. Ogawa, T. Shoji, and S. Murata, “High-temperature Oxidation Behavior and Surface Roughness Evolution of VPS NiCrAlY Coating”, Journal of Thermal Spray Technology, 17, 1 (2008), 136-143.

(388)Yasumoto Sato, Kimio Watanabe, Tetsuo Shoji, “Simulation of stress corrosion cracking behavior in a tube-shaped specimen of nickel-based alloy 600”, Nuclear Engineering and Design, 238, 1 (2008), 1-7.

(389)Hidemasa Takana, Kazuhiro Ogawa, Tetsuo Shoji and Hideya Nishiyama, “Computational simulation of cold spray process assisted by electrostatic force”, Powder Technology, 185, 2 (2008), 116-123.

(390)Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Yuzuru Ito, Akira Kai, Seiya Yamazaki, “Transient and steady state crack growth kinetics for stress corrosion cracking of a cold worked 316L stainless steel in oxygenated pure water at different temperatures”, Corrosion Science, 50, 2 (2008), 561-575.

(391)Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Yuzuru Ito, Akira Kai, Nobuhisa Tsuchiya, “Effects of loading mode and water chemistry on stress corrosion crack growth behavior of 316L HAZ and weld metal materials in high temperature pure water”, Corrosion Science, 50, 3 (2008), 625-638.

(392)Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Yuzuru Ito, Seiya Yamazaki, “The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment”, Corrosion Science, 50, 3 (2008), 698-712.

(393)Seiya Yamazaki, Zhangpeng Lu, Yuzuru Ito, Yoichi Takeda, Tetsuo Shoji, “The effect of prior deformation on stress corrosion cracking growth rates of Alloy 600 materials in a simulated pressurized water reactor primary water”, Corrosion Science, 50, 3 (2008), 835-846.

(394)JEROME ISSELIN, AKIRA KAI, KAZUHIKO SAKAGUCHI, and TETSUO SHOJI, “Assessment of the Effects of Cold Work on Crack Initiation in a Light Water Environment using the Small-Punch Test”, Metallurgical and Materials Transactions, 39, 5 (2008), 1099-1108.

(395)Nishith Kumar Das, Ken Suzuki, Yoichi Takeda, Kazuhiro Ogawa, Tetsuo Shoji, “Quantum chemical molecular dynamics study of stress corrosion cracking behaviour for fcc Fe and Fe-Cr surfaces”, Corrosion Science, 50, 6 (2008), 1701-1706.

(396)Nishith Kumar Das, Ken Suzuki, Yoichi Takeda, Kazuhiro Ogawa and Tetsuo Shoji, “Theoretical Design of SCC Resistant Ni-base Alloy by a Computational Chemistry Approach”, Proceedings of The 2008 International Congress on Advances in Nuclear Power Plants (ICAPP’08), (2008), 2175-2182, Paper No. 8048, in CD-ROM.

(397)Nishith Kumar DAS, Ken SUZUKI, Yoichi TAKEDA, Kazuhiro OGAWA and Tetsuo SHOJI, “Stress Corrosion Cracking Analysis of Fe (111) and Fe-Cr (111) Surface at Different Temperatures by Quantum Chemical Molecular Dynamics”, 16th Pacific Basin Nuclear Conference, (2008), Paper No. P16P1100, in CD-ROM.

(398)Nishith Kumar Das, Ken Suzuki, Yoichi Takeda, Kazuhiro Ogawa and Tetsuo Shoji, “Quantum chemical molecular dynamics study of strain effect on metal and oxide film interface interaction at high temperature”, EUROCORR 2008, (2008), Paper No. 1226, in CD-ROM

(399)H.P. Seifert, S. Ritter, T. Shoji, Q.J. Peng, Y. Takeda, Z.P. Lu, “Environmentally-assisted cracking behaviour in the transition region of an Alloy182/SA 508 Cl.2 dissimilar metal weld joint in simulated boiling water reactor normal water chemistry environment”, Journal of Nuclear Materials, 378, 2 (2008), 197-210.

(400)Zhanpeng Lu, Yoichi Takeda, Tetsuo Shoji, “Some fundamental aspects of thermally activated processes involved in stress corrosion cracking in high temperature aqueous environments”, Journal of Nuclear Materials, 383, 1-2 (2008), 92-96.

(401)Hidemasa Takana, Kazuhiro Ogawa, Tetsuo Shoji, Hideya Nishiyama, “Computational Simulation on Performance Enhancement of Cold Gas Dynamic Spray Processes With Electrostatic Assist”, Journal of Fluids Engineering, Transactions of the ASME, 130, 8 (2008), 081701-081707.

(402)Ismail Tirtom, Nishith Kumar Das, Ken Suzuki, Kazuhiro Ogawa and Tetsuo Shoji, “Multiscale Modeling Approach to Stress Corrosion Cracking”, Proceedings of The International Congress on Advances in Nuclear Power Plants, June 8-12, (2008), Anaheim, California, USA, Paper No. 8210, 2081-2089.

(403)Tetsuo Shoji, Zhanpeng Lu, Yoichi Takeda, Murakami, Chaoyang Fu, “Deterministic Prediction of Stress Corrosion Crack Growth Rates in High Temperature Water by Combination of Interface Oxidation Kinetics and Crack Tip Asymptotic Field”, ASEM Pressure Vessel & Piping Conference, (2008), Paper No. PVP2008-61417.

(404)Do. Seo, K. Ogawa, Y. Suzuki, K. Ichimura, T. Shoji, S. Murata, “Comparative study on oxidation behavior of selected MCrAlY coatings by elemental concentration profile analysis”, Applied Surface Science, 255, 5, Part 2 (2008), 2581-2590.

(405)Jinyi Lee, Renliang Wang, Tetsuo Shoji, Seongpyo Hong, “Non-destructive testing in the high-temperature regime by using a magneto-optical film”, NDT & E International, 41, 6 (2008), 420-426.

(406)K. Ogawa, Y. Nakao, D. Seo, H. Miura, T. Shoji, “Role of high-temperature creep stress in thermally grown oxide growth of thermal barrier Coatings”, The 2008 International Thermal Spray Conference (2008), ITSC2008.

(407)Ismail Tirtom, Tetsuo Shoji, “Python based combined continuum-atomic modeling for single crystal Nickel”, Multiscale Materials Modeling, MMM2008, 4th International Conference, (2008), 258-261.

(408)H. Xue, Y. Sato, T. Shoji, “Quantitative Estimation of the Growth of Environmentally Assisted Cracks at Flaws in Light Water Reactor Components”, Journal of Pressure Vessel Technology, (2009), 131, 1 011404.1-9.

(409)D. Seo, K. Ogawa, Y. Nakao, H. Miura, T. Shoji, “Influence of high-temperature creep stress on growth of thermally grown oxide in thermal barrier coatings”, Surface and Coatings Technology, 203, 14 (2009), 1979-1983.

(410)Nishith Kumar Das, Ken Suzuki, Kazuhiro Ogawa, Tetsuo Shoji, “Early stage SCC initiation analysis of fcc Fe-Cr-Ni ternary alloy at 288℃: A quantum chemical molecular dynamics approach”, Corrosion Science, 51, 4 (2009), 908-913,.

(411)N. K. Das, T. Shoji, K. Suzuki, and Y. Takeda, “A Quantum Chemical Molecular Dynamics Study of the Strain Effect on Oxygen Diffusion in fcc Fe (111) and Fe-Cr (111) Surfaces at 288℃”, Proceedings of 12th International Conference on Fracture, (2009), 1-8. Paper No. T06.009 , in CD-ROM.

(412)He Xue, Kazuhiro Ogawa, Tetsuo Shoji, “Effect of welded mechanical heterogeneity on local stress and strain ahead of stationary and growing crack tips”, Nuclear Engineering and Design, 239, 4 (2009), 628-640.

(413)Tetsuo Shoji, Zhanpeng.Lu, Nishith Kumar Das, Hiroyoshi Murakami, Yoichi Takeda, Ismail Tirtom, “MODELING STRESS CORROCION CRACKING GROWTH RATES BASED UPON THE EFFECT OF STRESS/STRAIN ON CRACK TIP INTERFACE DEGRADATION AND OXIDATION REACTION KINETICS”, Proceedings of PVP (2009): 2009 ASME Pressure Vessels and Piping Division Conference, (2009), PVP2009-77615, in CD-ROM.

(414)Zhanpeng Lu, He Xue, Hiroyoshi Murakami, Tetsuo Shoji, “LOCALLY DELAMINATING STRESS CORROSION CRACKING GROWTH OF STRAIN-HARDENED AUSTENITIC ALLOYS IN HYDROGENATED HIGH TEMPERATURE WATER ENVIRONMENTS”, Proceedings of PVP 2009: 2009 ASME Pressure Vessels and Piping Division Conference, (2009), PVP2009-77622, in CD-ROM.

(415)He Xue, Zhanpeng Lu, Hiroyoshi Murakami, Tetsuo Shoji, “EFFECT OF UNEVEN CRACK FRONT ON CRCAK TIP MECHANICS AND THE IMPLICATION TO STRESS CORROSION CRACK GROWTH”, Proceedings of PVP 2009: 2009 ASME Pressure Vessels and Piping Division Conference, (2009), PVP2009-77625, in CD-ROM.

(416)Q.J. Peng, Y. Takeda, J. Kuniya, T. Shoji, “Effects of Dissolved Hydrogen on the Electronic Properties of the Oxide Film on Alloy 600 in High Temperature Water”, Proceedings of 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2009), 119-128.

(417)Jerome Isselin and Tetsuo Shoji, “Yield Strength Evaluation by Small-Punch Test”, Journal of Testing and Evaluation, 37, 6 (2009), 531-537, Paper ID JTE101657.

(418)Tetsuo Shoji, Zhanpeng Lu, Seiya yamazaki, “The effect of strain-hardening on PWSCC of Nickel-base Alloys 600 and 690”, Proceedings of 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2009), 220-238. INVITED.

(419)Zhanpeng Lu, Kazuhiko Sakaguchi, Koji Negishi, Yoichi Takeda, Yuzuru Ito, Tetsuo Shoji, “Quantifying the effects of strain-hardening and water chemistry on crack growth rates of 316L SS welds in high temperature water”, Proceedings of 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2009), 636-645. INVITED.

(420)Zhanpeng Lu, Tetsuo Shoji, Seiya yamazaki, “EFFECTS OF LOADING MODE AND WATER CHEMISTRY ON STRESS CORROSION CRACKING OF 316L STAINLESS STEEL IN SIMULATED PWR ENVIRONMENTS”, Proceedings of 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems- ater Reactors, (2009), 207-217.

(421)N. Kumar Das and Tetsuo Shoji, “WATER DISSOCIATION AND ADSORPTION ON NI-CR (111) BINARY ALLOY SURFACE AT 325℃”, Proceedings of the 8th International Conference on Mechanical Engineering 2009 (ICME2009), (2009), Paper No. AM-11, in CD-ROM.

(422)Tetsuo Shoji, Zhanpeng Lu, Hiroyoshi Murakami, “Formulating stress corrosion cracking growth rates by combination of crack tip mechanics and crack tip oxidation kinetics”, Corrosion Science, 52, 3 (2010), 769-779.

(423)J. Hou, Q.J. Peng, K. Sakaguchi, Y. Takeda, J. Kuniya, T. Shoji, “Effect of hydrogen in Inconel Alloy 600 on corrosion in high temperature oxygenated water”, Corrosion Science, 52, 3 (2010), 1098-1101.

(424)Tichun Dan, Tetsuo Shoji, Zhanpeng Lu, Kazuhiko Sakaguchi, Jianqiu Wang, En-Hoi Han, Wei Ke, “Effects of hydrogen on the anodic behavior of Alloy 690 at 60℃”, Corrosion Science, 52, 4 (2010), 1228-1236.

(425)Nishith Kumar Das, Ismail Tirtom, Tetsuo Shoji, “A multiscale modelling study of Ni–Cr crack tip initial stage oxidation at different stress intensities”, Materials Chemistry and Physic, 122, 2-3 (2010), 336-342.

(426)Nishith Kumar Das, Tetsuo Shoji, “A COMPUTATIONAL CHEMISTRY STUDY OF THE OXIDATION MECHANISM AT THE RANDOM GRAIN BOUNDARY OF AN Fe-Cr BINARY ALLOY”, Mission: Corrosion Control, NACE INTERNATIONAL CORROSION 2010 CONFERENCE, (2010), Paper No. 10286, in CD-ROM.

(427)Nishith Kumar Das, Tetsuo Shoji, Yoichi Takeda, “A fundamental study of Fe-Cr binary alloy-oxide film interfaces at 288℃ by computational chemistry calculations”, Corrosion Science, 52, 7 (2010), 2349-2352.

(428)J. Hou, T. Shoji, Z.P. Lu, Q.J. Peng, J.Q. Wang, E.-H. Han, W. Ke, “Residual strain measurement and grain boundary characterization in the heat-affected zone of a weld joint between Alloy 690TT and Alloy 52”, Journal of Nuclear Materials, 397, 1-3 (2010), 109-115.

(429)J. Hou, Q. J. Peng, Y. Takeda, J. Kuniya, T. Shoji, J. Q. Wang, E.-H. Han, W. Ke, “Microstructure and mechanical property of the fusion boundary region in an Alloy 182-low alloy steel dissimilar weld joint”, Journal of Materials Science, 45, 19 (2010), 5332–5338.

(430)Zhanpeng Lu, Tetsuo Shoji, Wu Yang, “Anomalous surface morphology of iron generated after anodic dissolution under magnetic fields”, Corrosion Science, 52, 8 (2010), 2680-2686.

(431)Zhanpeng Lu, Tetsuo Shoji, Tichun Dan, Yubing Qiu, ToshioYonezawa, “The effect of roll-processing orientation on stress corrosion cracking of warm-rolled 304L stainless steel in oxygenated and deoxygenated high temperature pure water”, Corrosion Science, 52, 8 (2010), 2547-2555.

(432)Tetsuo Shoji, Zhanpeng Lu, He Xue, Yubing Qiu, Kazuhiko Sakaguchi, “QUANTIFYING CRACK TIP OXIDATION KINETICS PARAMETERS AND THEIR CONTRIBUTION TO STRESS CORROSION CRACKING IN HIGH TEMPERATURE WATER”, Proceedings of the ASME 2010 Pressure Vessels & Piping Division /K-PVP Conference, (2010), PVP2010-25238, in CD-ROM.

(433)Zhanpeng Lu, He Xue, Tetsuo Shoji, “CRACK BRANCHING AND ITS EFFECT ON ENVIRONMENTALLY ASSISTED CRACKING IN HIGH TEMPERATURE WATER ENVIRONMENTS”, Proceedings of the ASME 2010 Pressure Vessels & Piping Division /K-PVP Conference, (2010), PVP2010-25818, in CD-ROM

(434)Yuji Tanabe, Takeo Tamura, Kenji Suzuki, Jiro Kuniya, Tetsuo Shoji, “CONTRIBUTORY FACTORS TO ACCURATE PREDICITION OF RATE OF STRESS CORROSION CRACKING IN BOILING WATER REACTOR UNDER UNEXPECTED CONDITION DURING OPERATION-3-THE EFFECT OF HIGH LOADING RATE ON SCC GROWTH BEHAVIOUR-”, Proceedings of the ASME 2010 Pressure Vessels & Piping Division /K-PVP Conference, (2010), PVP2010-26136, in CD-ROM.

(435)Noriyoshi Maeda, Tetsuo Shoji, “FAILURE PROBABILITY ANALYSIS BY PROBABILISTIC FRACTURE MECHANICS BASED ON FRI SCC MODEL”, Proceedings of the ASME 2010 Pressure Vessels & Piping Division /K-PVP Conference, (2010), PVP2010-25917, in CD-ROM.

(436)Yoichi Takeda, Zhanpeng Lu, Takeshi Adachi, Qunjia Peng, Jiro Kuniya, Tetsuo Shoji, “INFLUENCING FACTORS FOR IMPROVING ACCURACY IN PREDICTION OF STRESS CORROSION CRACK GROWTH RATE IN BOILING WATER REACTOR OPERATIONAL CONDITION-1 PREDICTION OF SCC GROWTH RATE IN TERMS OF VICKERS HARDNESS”, Proceedings of the ASME 2010 Pressure Vessels & Piping Division /K-PVP Conference, (2010), PVP2010-26135, in CD-ROM

(437)Yuzuru Ito, Masahiro Saito, Qunjia Peng, Jiro Kuniya, Tetsuo Shoji, “INFLUENCING FACTORS FOR IMPROVING ACCURACY IN PREDICTION OF STRESS CORROSION CRACK GROWTH RATE IN BOILING WATER REACTOR OPERATIONAL CONDITION-2”, Proceedings of the ASME 2010 Pressure Vessels & Piping Division /K-PVP Conference, (2010), PVP2010-26121, in CD-ROM.

(438)Juan Hou, Qunjia Peng, Yoichi Takeda, Jiro Kuniya, Tetsuo Shoji, “Microstructure and stress corrosion cracking of the fusion boundary region in an alloy 182-A533B low alloy steel dissimilar weld joint”, Corrosion Science, 52, 12 (2010), 3949-3954.

(439)Ismail TIRTOM, Nishith Kumar DAS and Tetsuo SHOJI, “Stress Intensity Effect on Solid State Oxidation of Ni-Cr Alloy with Different Chromium Concentrates”, Journal of Solid Mechanics and Materials Engineering, 4, 7 (2010), Special Issue of APCMM2009 II, 931-937.

(440)Masatoshi Tanno, kazuhiro Ogawa, Tetsuo Shoji, “Influence of asymmetric electrode geometry on an impedance spectrum of a plasma-sprayed thermal barrier coating system”, Surface and Coatings Technology, 204, 15 (2010), 2504-2509.

(441)D. Seo, Sendai/J, N. Mahiou, Villeurbanne/F, K. Ogawa, T. Shoji, K. Ito, and I. Tirtom, Sendai/J, “Feasibility of Polycarbonate Coatings by Cold Spray Process”, The 2010 International Thermal Spray Conference (ITSC2010), (2010), No. 2048, 43.

(442)Qunjia Peng, He Xue, Juan Hou, Yoichi Takeda, Jiro Kuniya, Tetsuo Shoji, “Stress Corrosion Cracking in the Fusion Boundary Region of an Alloy 182- A533B Low Alloy Steel Dissimilar Weld Joint in High Temperature Oxygenated Water”, Proceedings of International Symposium of Fontevraud 7, (2010), in CD-ROM.

(443)J. Hou, Q.J. Peng, Z.P. Lu, T. Shoji, J.Q. Wang, E.-H. Han, W. Ke, “Effects of cold working degrees on grain boundary characters and strain concentration at grain boundaries in Alloy 600”, Corrosion Science, 53, 3 (2011), 1137-1142.

(444)O. Lavigne, Y. Takeda, T. Shoji, K. Sakaguchi, “Generation of hydroxyl radicals by sonochemistry: Effects on the electrochemical behaviour of a 316L stainless steel”, Corrosion Science, 53, 3 (2011), 1079-1085.

(445)O. Lavigne, Y. Takeda, T. Shoji, K. Sakaguchi, “Water irradiation by high-frequency ultrasonic wave: Effects on properties of passive film formed on stainless steel”, Ultrasonics Sonochemistry, 18, 6 (2011), 1287-1294.

(446)Zhanpeng Lu, Tetsuo Shoji, Fanjiang Meng, He Xue, Yubing Qiu, Yoichi Takeda, Koji Negishi, “Characterization of microstructure and local deformation in 316NG weld heat-affected zone and stress corrosion cracking in high temperature water”, Corrosion Science, 53, 5 (2011), 1916-1932.

(447)Fanjiang Meng, Zhanpeng Lu, Tetsuo Shoji, Jianqiu Wang, En-hou Han, Wei Ke, “Stress corrosion cracking of uni-directionally cold worked 316NG stainless steel in simulated PWR primary water with various dissolved hydrogen concentrations”, Corrosion Science, 53, 8 (2011), 2558-2565.

(448)He Xue, Zhijun Li, Zhanpeng Lu, Tetsuo Shoji, “The effect of a single tensile overload on stress corrosion cracking growth of stainless steel in a light water reactor environment”, Nuclear Engineering and Design, 241, 3 (2011), 731-738.

(449)Yubing Qiu, Tetsuo Shoji, Zhanpeng Lu, “Effect of dissolved hydrogen on the electrochemical behaviour of Alloy 600 in simulated PWR primary water at 290 °C”, Corrosion Science, 53, 5 (2011), 1983-1989.

(450)Nishith Kumar Das and Tetsuo Shoji. “A FUNDAMENTAL STUDY OF AN Fe-Cr (111) BINARY ALLOY-METAL OXIDE (110)-WATER INTERFACES”, NACE INTERNATIONAL CORROSION 2011 CONFERENCE, (2011), in CD-ROM.

(451)Zhanpeng Lu, Tetsuo Shoji, Fanjiang Meng, Yubing Qiu, Tichun Dan, He Xue, “Effects of water chemistry and loading conditions on stress corrosion cracking of cold-rolled 316NG stainless steel in high temperature water”, Corrosion Science, 53, 1 (2011), 247-262.

(452)Motoki Nakajima, Masayuki Hosokawa, Shin-ichi Komazaki and Tetsuo Shoji, “Influence of Hydrogen Content in Steel on Atmospheric Oxidation Behavior of Low Carbon Austenitic Stainless Steel”, Journal of the Japan Institute of Metals, 75, 4 (2011), 243-247.

(453)Noriyoshi Maeda, Tetsuo Shoji, “FAILURE PROBABILITY ANALYSIS BASED ON FRI MODEL FOR SCC GROWTH INTRODUCING STRESS INTENSITY FACTOR DISTRIBUTION AS FUNCTION OF CRACK DEPTH”, Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference, (2011), PVP2011-57926, in CD-ROM.

(454)Zhanpeng Lu, Tetsuo Shoji, He Xue, Chaoyang Fu, “MECHANISTIC FORMULATION OF PWSCC GROWTH RATES OF NI-BASE ALLOYS AND WELDMENTS”, Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference, (2011), PVP2011-57223, in CD-ROM.

(455)He Xue, Zhijun Li, Xiaofeng Xue, Zhanpeng Lu, Tetsuo Shoji, “FURTHER UNDERSTANDING ON DEFORMATION-OXIDATION MODEL IN STRESS CORROSION CRACKING TIP BASED ON MESO-SCALE MECHANICAL FIELD”, Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference, (2011), PVP2011-57244, in CD-ROM.

(456)He Xue, Xiaoyan Gong, Lingyan Zhao, Zhanpeng Lu, Tetsuo Shoji, “EFFECT OF MECHANICAL PARAMETER SELECTION IN QUANTITATIVE ESTIMATION OF THE GROTH OF ENVIRONMENTALLY ASSISTED CRACKS AT FLAWS IN LIGHT WATER REACTOR COMPONENTS WITH COMPLEX MECHANICAL CONDITION”, Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference, (2011), PVP2011-57317, in CD-ROM.

(457)Qunjia Peng, He Xue, Juan Hou, Kazahiko Sakaguchi, Yoichi Takeda, Jiro Kuniya, Tetsuo Shoji, “Role of water chemistry and microstructure in stress corrosion cracking in the fusion boundary region of an Alloy 182-A533B low alloy steel dissimilar weld joint in high temperature water”, Coeeosion Science, 53, 12 (2011), 4309-4317.

(458)Qunjia Peng, Tetsuo Shoji, Juan Hou, Kazuhiko Sakaguchi, Yoichi Takeda, “ROLE OF DISSOLVED HYDROGEN IN WATER IN CORROSION OF ALLOY 600 IN HIGH TEMPERATURE WATER”, Proceedings of the 15 th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2011), 1879-1888.

(459)O. Lavigne, Y. Takeda, T. Shoji, “SIMULATION OF WATER RADIOLYSIS BY SONOCHEMISTRY: EFFECTS ON THE ELECTROCHEMICAL BEHAVIOR OF A STAINLESS STEEL”, Proceedings of 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2011), 2091-2100.

(460)Zhanpeng Lu, Tetsuo Shoji, Seiya Yamazaki, Fanjiang Meng, Tichun Dan, Yoichi Takeda, Koji Negishi, “Deformation Mode and Microstructure on Stress Corrosion Cracking Path and Kinetics in High Temperature Water Environments”, Proceedings of the 15 th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2011), 533-544.

(461)Yoichi Takeda, Takayuki Sato, Daisuke Yamauchi, Tetsuo Shoji, Akio Ohji, “NON-LINEAR DYNAMICS OF THE MORPHOLOGY AT THE OXIDE / METAL INTERFACE OF AUSTENITIC STEELS IN SIMULATED LIGHT WATER REACTOR ENVIRONMENTS AND ITS IMPLICATIONS FOR SCC INITIATION”, Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2011), 409-419.

(462)Qunjia Peng, Tetsuo Shoji, Juan Hou, Yoichi Takeda, Toshio Yonezawa, “ENVIRONMENTALLY ASSISTED CRACK GROWTH IN COLD WORKED ALLOY 690TT IN PRIMARY WATER AT LOW AND HIGH TEMPERATURES”, Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2011), 149-158.

(463)Toshio Yonezawa, Masashi Watanabe, Takahisa Shobu and Tetsuo Shoji, “In-situ and Ex-situ Oxide Characterization by Synchrotron X-ray (SPring-8) in Non-sensitized 316 Stainless Steel and High Temperature Water Combination”, Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, (2011), 357-368.

(464)Nishith Kumar Das and Tetsuo Shoji, “A density functional study of atomic oxygen and water molecule adsorption on Ni (111) and chromium substituted-Ni (111) surfaces”, Applied Surface Science, 258, 1 (2011), 442-447.

(465)Nishith Kumar Das and Tetsuo Shoji, “A theoretical study of the interaction of water with the Cr2O3 (110) and Fe2O3 (110) surfaces”, Proceedings of Eurocorr 2011-The European Corrosion Congress 2011, (2011), Paper No. 4724.

(466)Qunjia Peng, Juan Hou, Kazuhiko Sakaguchi, Yoichi Takeda, Tetsuo Shoji, “Effect of dissolved hydrogen on corrosion of Inconel Alloy 600 in high temperature hydrogenated water”, Electrochimica Acta, 56, 24 (2011), 8375-8386.

(467)T. C. Dan, Z. P. Lu, J. Q. Wang, E. H. Han, T. Shoji, W. Ke, “CRACK GROWTH BEHAVIOR OF STRESS CORROSION CRACKING OF 690 ALLOY IN HIGH TEMPERATURE WATER”, Acta Metallurgica Sinica, 46,10 (2010), 1267-1274.

(468)Zhanpeng Lu, Tetsuo Shoji, He Xue, Fanjiang Meng, Chaoyang Fu, Yoichi Takeda, Koji Negishi, “Synergistic effects of local strain-hardening and dissolved oxygen on stresscorrosion cracking of 316NG weld heat-affected zones in simulated BWR environments”, Journal of Nuclear Material, 423 (2011), 28-39.

(469)Zhanpeng Lu, Tetsuo Shoji, Seiya Yamazaki, Kazuhiro Ogawa, “Characterization of microstructure, local deformation and microchemistry in Alloy 600 heat-affected zone and stress corrosion cracking in high temperature water”, Corrosion Science, 58 (2012), 211-288.

(470)N. K. Das and T. Shoji, “An Atomistic Study of Oxidation Initiation on Different Kinds of fcc Fe-Cr Binary Alloy Surfaces”, Materials Science and Technology 2011, (2011), 1366-1373.

(471)Q. J. Peng, J. Hou, T. Yonezawa, Z. M. Zhang, F. Huang, E.-H. Han, W. Ke, “Environmentally assisted crack growth in one-dimensionally cold worked Alloy 690TT in primary water”, Corrosion Science, 57 (2012), 81-88.

(472)Nishith K. Das and Tetsuo Shoji, “Geometry, Orbital Interaction, and Oxygen Chemisorption Properties of Chromium-Doped Nickel Clusters”, The Journal of Physical Chemistry C, 116, 24 (2012), 13353-13367.

(473)Nishith Kumar Das, Tetsuo Shoji, “An atomic study of hydrogen effect on the early stage oxidation of transition metal surfaces”, International Journal of Hydrogen Energy, 38, 3 (2013), 1644-1656

(474)Masashi Watanabe, Toshio Yonezawa, Takahisa Shobu, Tetsuo Shoji, ”Measurement methods for surface oxides on SUS 316L in simulated light water reactor coolant environments using synchrotron XRD and XRF”, Journal of Nuclear Materials, 434, 1-3 (2013), 189-197.

(475)O. Lavigne, T. Shoji, K. Sakaguchi, “On the corrosion behavior of zircaloy-4 in spent fuel pools under accidental conditions”, Journal of Nuclear Materials, 426, 1-3 (2012), 120-125.

(476)Nishith Kumar Das, Tetsuo Shoji, “Early Stage Oxidation Initiation at Different Grain Boundaries of fcc Fe-Cr Binary Alloy: A Computational Chemistry Study”, Oxidation of Metals, 79, 3-4 (2013), 429-441

(477)Nishith Kumar Das, Tetsuo Shoji, “A first-principles study of structure, orbital interactions and atomic oxygen and OH adsorption on Mo-, Sc- and Y-doped nickel bimetallic clusters”, Journal of Alloys and Compounds, 580, (2013), 37-54

(478)Nishith Kumar Das, Tetsuo Shoji, “Early stage oxidation of Ni-Cr binary alloy (111), (110) and (100) surfaces: A combined density functional and quantum chemical molecular dynamics study”, Corrosion Science, 73, (2013), 18-31

(479)Zhanpeng Lu, Tetsuo Shoji, He Xue and Chaoyang Fu, “Deterministic Formulation of the Effect of Stress Intensity Factor on PWSCC of Ni-Base Alloys and Weld Metals”, Journal of Pressure Vessel Technology, 135, 2 (2013), 021402-1-9

(480)Olivier Lavigne, Tetsuo Shoji, Yoichi Takeda, “EIS pitting temperature determination of A182 nickel based alloy in simulated BWR environment containing dilute seawate”, Nuclear Engineering and Design, 273, (2014), 435-439.

(481)Xiaofeng Xia, Zhanpeng Lu, Tetsuo Shoji, Ru Xiong, Qian Xiao, Junjie Chen, Bangxin Zhou, “Effects of Hydrogen on Electrochemical Behavior of a Nickel Based Alloy”, ECS Transactions, 59, 1 (2014), 455-463.

(482)Ahsan Fjaz, Zhanpeng Lu, Tetsuo Shoji, Junjie Chen, Bangxin Zhou, “The effects of hydrogen on reactivation of iron in alkaline solutions”, ECS Transactions, 59, 1 (2014), 421-428.

(483)Z.P. Lu, T. Shoji, Y. Takeda, “Effects of water chemistry on stress corrosion cracking of 316NG weld metals in high temperature water”, Corrosion Engineering Science & Technology, 50, 1 (2015), 41-48.

(484)Zhanpeng Lu, Junjie Chen, Tetsuo Shoji, Fanjiang Meng, “Dependence of crack growth kinetics on dendrite orientation and water chemistry for Alloy 182 weld metal in high-temperature water”, Journal of Nuclear Materials, 458, (2015), 253-263.

(485)中島基樹, 細川将之, 駒崎慎一, 庄子哲雄, “低炭素オーステナイト系ステンレス鋼の大気酸化挙動に及ぼす鋼中水素の影響”, 日本金属学会誌, 第75巻, 第4号(2011), 243-247.

(486)Motoki NAKAJIMA, Shin-ichi KOMAZAKI and Tetsuo SHOJI, “Influence of Hydrogen in Steel on Oxidation Behavior of Low Carbon Austenitic Stainless Steel in High Temperature Water”, E-Journal of Advanced Maintenance, Japan Society of Maintenology, 5, (2013), 175-184.

(487)Jian Xu, Tetsuo Shoji, “The corrosion behavior of Alloy 52 weld metal in cyclic hydrogenated and oxygenated water chemistry in high temperature aqueous environment”, Journal of Nuclear Materials, 461 (2015), 10-21.

(488)Wei-Wei Zheng, Tetsuo Shoji, Haruki Itofuji, Jian-Hua Zhang, “Metallurgical Study of the Cannon casted in the Late Ming Dynasty -A Dutch-style cannon with inscription Year 11th of Chongzhen-”, FUSUS, 7 (2015), 33-48.

(489)Jian Xu, Tetsuo Shoji, Changheui Jang, “The effects of dissolved hydrogen on the corrosion behavior of Alloy 182 in simulated primary water”, Corrosion Science, 97 (2015), 115-125.

(490)Ahsan Ejaz, Zhanpeng Lu1, Junjie Chen, Qian Xiao, Xiangkun Ru,Guangdong Han, Tetsuo Shoji, “The effects of hydrogen on anodic dissolution and passivation of iron in alkaline solutions”, Corrosion Science, 101 (2015), 165-181.

(491)Masashi Watanabe, Toshio Yonezawa, Takahisa Shobu, and Tetsuo Shoji, “In Situ X-Ray Diffraction Measurement Method for Investigating the Oxides Films on Austenitic Stainless Steel in Simulated Pressurized Water Reactor Primary Water”, Corrosion, 71, 10 (2015), 1224-1236

(492)Z.P. Lu, J.J. Chen, T. Shoji, Y. Takeda, S. Yamazaki., “Characterization of microstructure, local deformation and microchemistry in Alloy 690 heat-affected zone and stress corrosion cracking in high temperature water.”, Journal of Nuclear Materials, 465 (2015), 471-481

(493)Zhanpeng Lu, Tetsuo Shoji, “Some mechano-electrochemical aspects of SCC in high temperature water and related modeling”, Proc. of the 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors Canadian Nuclear society, August 9-12 ( 2015), Ottawa, Ontario, Canada, CD-ROM

(494)Xiaofeng Xia, Zhanpeng Lu, Ru Xiong, Junjie Chen, Qian Xiao, Tetsuo Shoji, “Effects of hydrogen in alloy 690 on interfacial reaction kinetics”, Proc. of the 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, Canadian Nuclear society, August 9-12 (2015), Ottawa, Ontario, Canada, CD-ROM (PDF依頼中)

(495)J. Xu, S. Xia, X.Y. Zhong, T. Shoji, “The corrosion behavior of nickel-based alloys 182 and 52 and 316 stainless steel in cyclic hydrogenated and oxygenated water chemistry in high temperature aqueous environment”. Proc. of 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, August 9-13 (2015), Ottawa, Canada, CD-ROM

(496)J. Xu, J. Kuniya, Y. Takeda, T. Shoji, “The SCC behavior of Alloy 82/low alloy steel dissimilar metal weld in the fusion boundary region in a simulated primary water environment”, Proc. of 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, August 9-13 (2015), Ottawa, Canada, CD-ROM

(497)J. Xu, T. Shoji, “The corrosion behavior of Alloy 182 in a cyclic hydrogenated and oxygenated water chemistry in high temperature aqueous environment”, Corrosion Science, 104 (2015), 248-259.

(498)Choongmoo SHIM, Yoichi TAKEDA , Jiro KUNIYA and Tetsuo SHOJI, “Short Fatigue Crack Behavior During Low Cycle Fatigue Tests of 316 Stainless Steel in Simulated PWR Primary Water”, Short paper of the 2nd International Conference on Maintenance Science and Technology, November 2-5 (2014), Kobe, Japan, 51-52.

(499)Yoichi Takeda, Yuji Ozawa, Masashi Saito, Tetsuo Shoji, “APPLICABILITY OF THE CONTOURED DOUBLE CANTILEVER BEAM SPECIMEN FOR CRACK GROWTH TESTS UNDER CONSTANT STRESS INTENSITY FACTOR”, Proc. of 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors August 9-13　(2015), Ottawa, Ontario, Canada, CD-ROM

(500)Choongmoo Shim, Yoichi Takeda, Tetsuo Shoji, Xiangyu Zhong, Shirish, Chandarakant Bali, “Short Crack Behavior of Austenitic Stainless Steels in Simulated PWR Primary Water during Fatigue Damage and Monotonid Deformation”, Proceedings of 4th International Conference on Fatigue of Nuclear Reactor Components, 28th September-1st October (2015), Sevilla, Spain. Paper No.52.

(501)鄭 巍巍, 庄子哲雄, 糸藤春喜, 張建華, “明初期に鋳造された洪武大砲の金属組織学的調査”, 日本金属学会誌, 第80巻, 第3号(2016), 176-185.

(502)Masashi Watanabe, Toshio Yonezawa, Alum Shiro, Takahisa Shobu and Tetsuo Shoji, “In Situ X-ray Diffraction Study of the Oxide Formed on Alloy 600 in Borated and Lithiated High Temperature Water”, Corrosion, Vol. 72, 9 (September 2016), 1155-1169

(503)Xiangyu Zhong, Sirishi Bali, Tetsuo Shoji, “EFFECTS OF DISSOLVED HYDROGEN ON THE ENVIRONMENTALLY ASSISTED CRACKING OF 316 STAINLESS STEEL IN PWR PRIMARY WATER AT 325 ℃”, Proc. of 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, August 9-13 (2015), Ottawa, Canada, CD-ROM

(504)Nishith K. Das, T. Shoji, “FIRST-PRINCIPLES STUDY OF ATOMIC HYDROGEN AND OXYGEN ADSORPTION ON DOPED-IRON NANOCLUSTERS”, Proc. of the 24th International Conference on Nuclear Engineering (ICONE 24), June 26-30 (2016), NC, USA, Paper No.60516

(505)H. Kim and T. Shoji, "A Study on Induced Current Focusing Potential Drop (ICFPD) Technique -Examination of the Sizing Accuracy of Defects and Its Frequency Dependence". Journal of the Society of Materials Science Japan, Vol. 43, No. 494, (1994), 1482-1488

(506)Xiangyu Zhong, Shirish Chandrakant Bali, Tetsuo Shoji, “Accelerated test for evaluation of intergranular stress corrosioncracking initiation characteristics of non-sensitized 316 austeniticstainless steel in simulated pressure water reactor environment”, Corrosion Science, 115, (2017), 106-117

(507)J. Xu, T. Shoji, “The corrosion behavior of Alloy 182 in a cyclic hydrogenated and oxygenated water chemistry in high temperature aqueous environment”, Corrosion Science, Vol. 104 (2016), 248-259.

(508)Nishith K. Das and T. Shoji, “First principles calculations of hydrogen interaction with a monovacancy and divacancy containing nickel”, Materials Research Express, Vol.4, No.7 (2017), Paper No. 076505.

(509)Lianlian Wu, Yoichi Takeda, Tetsuo Shoji, Mitsuo Yamashita, Sakae Izumi,  “The Influence of Tempering Treatment on the Microstructure Evolution and Corrosion Resistance of Precipitation Hardening 17-4 Stainless Steel”, CORROSION. Vol.72, Issue 9 (Sep. 2016), 1083-1094.

(510)Lianlian Wu, Yoichi Takeda, Hiroki Morita, Tetsuo Shoji, “A Comparison of Stress Corrosion Cracking Susceptibility of Steam Turbine Blade Materials for Geothermal Plants”, CORROSION. Vol.73, Issue 2 (Feb. 2017), 125-137.

(511)Lianlian Wu, Yoichi Takeda, Tetsuo Shoji, Mitsuo Yamashita, Sakae Izumi, “Effect of Reversed Austenite on the Stress Corrosion Cracking of Modified 17-4PH Stainless Steel”, CORROSION, Vol. 73, Issue 6 (June 2017), 704-712.

(512)Y.H. Lu, Q.J. Peng , T. Sato, T. Shoji, “An ATEM study of oxidation behavior of SCC crack tips in 304L stainless steel in high temperature oxygenated water”, Journal of Nuclear Materials, Vol. 347, Issues 1-2 (2005), 52–68.

(513)陆永浩,褚武扬,高克玮,乔利杰,T.Shoji, “304L不锈钢在高温水中的应力腐蚀裂纹扩展.金属学报”, Vol. 40, No. 7 (2004), 763-767.

(514)Y.H.Lu, Z.R.Chen, X.F.Zhu, T.Shoji, “SCC behaviors of an austenitic stainless steel Z3CN20-09M in high temperature water”, Materials Science and Technology, Vol.30, No.15 (2014), 1944-1950.

(515)X.Y. Cao, X.F. Ding, Y.H. Lu, P. Zhu, T. Shoji, “Influences of Cr content and PWHT on microstructure and oxidation behavior of stainless steel weld overlay cladding materials in high temperature water”, Journal of Nuclear Materials, Vol. 467 (2015), 32-41.

(516)W. Wang, Y. H. Lu, X.F. Ding, T. Shoji, “Microstructures and microhardness at fusion boundary of 316 stainless steel/Inconel 182 dissimilar welding”, Materials Characterization, Vol. 107 (2015), 255–261.

(517)Z.H. Wang, Y.H. Lu, H.Y. Zhang, T. Shoji, “Effect of cold rolling on the fretting wear behavior and Mechanism in Inconel 600 Alloy”, Tribology Transactions, Vol.59, No.5 (2016), 923-931.

(518)Z.H. Wang, Y.H. Lu, J. Li, T. Shoji, “Effect of pH value on the fretting wear behavior of Inconel 690 alloy”, Tribology International, Vol.95 (2016), 162-169.

(519)L. Xin, B.B. Yang, Z.H. Wang, J. Li, Y.H. Lu, T. Shoji, “Microstructural evolution of subsurface on Inconel 690TT alloy subjected to fretting wear at elevated temperature”, Materials & Design, Vol. 104 (2016), 152-161

(520)L. Xin, Z. H. Wang, J. Li, Y. H. Lu, T. Shoji, “Microstructural characterization of subsurface caused by fretting wear of Inconel 690TT alloy”, Materials Characterization, Vol. 115 (2016), 32-38.

(521)L. Xin, B.B. Yang, Z.H. Wang, J. Li, Y.H. Lu, T. Shoji, “Effect of normal force on fretting wear behavior and mechanism of Alloy 690TT in high temperature water”, Wear, Vol. 368–369 (2016), 210-218.

(522)L. Xin, Z.H. Wang, J. Li, Y.H. Lu, T. Shoji, “Fretting wear behavior and mechanism of Inconel 690 alloy related to displacement amplitude”, Tribology Transactions, Vol. 60, Iss. 5 (2016), 913-922.

(523)Z.R.Chen, Y.H.Lu, X.F.Ding, T.Shoji, “Microstructural and hardness investigations ona dissimilar metal weld between low alloy steel and Alloy 82 weld metal”, Materials Characterization, Vol. 121 (2016), 166-174.

(524)Xiangyu Zhong, Shirish Chandrakant Bali, Tetsuo Shoji, “Effects of dissolved hydrogen and surface condition on the intergranular stress corrosion cracking initiation and short crack growth behavior of non-sensitized 316 stainless steel in simulated PWR primary water”, Corrosion Science, Vol. 118 (2017), 143-157.

(525)Jian Xu, Zihao Wang, Tetsuo Shoji, “Effects of hydrogen on corrosion of pure Ni in high temperayure water”, Corrosion Science, Vol.122 (2017), 123-129.

(526)Choongmoo Shim, Yoichi Takeda and Tetsuo Shoji, Fatigue life prediction of 316 stainless steel in simulated PWR primary water by time domain analysis based on short fatigue crack growth behavior, Mechanical Engineering Journal, Vol.4, No.4 (2017), Paper No. 17-00035.

获奖情况

・A. B. Campbell Award for young authors National Association of Corrosion Engineers, USA , March 1977
・JSME Award for young researchers Japan Society of Mechanical Engineers, Japan, February 1983
・JSME Award for best papers Japan Society of Mechanical Engineers, Japan, April 1990
・GRSJ Award for best papers The Geothermal Research Society of Japan, Japan, October 1990
・JSME Tohoku Regional Award for Best Joint Research Japan Society of Mechanical Engineers, Tohoku Region, March 1995
・Honor member of Russian International Academy of Engineering, Russian International Academy of Engineering, June 1995
・JSME Northeast Branch Award for Technical Research , JSME Tohoku Branch, March 1995
・W. R. Whitney Award, NACE International, USA, March 1998
・JSME Division Award for Outstanding Contribution in Mechanics and Materials, Division of Mechanics and Materials, JSME, November 1998
・JSME Award for Fellow, JSME, March 2001
・ASTM Division Award for Annual Best Paper published in Journal of Testing and Evaluation, ASTM, March 2001
・JSME Division Award for International Activity, Division of Mechanics and Materials, JSME, October 2002
・Japan Thermal Spraying Society Award for best papers, Japan, June 2003
・First Prime in the competition on fundamental investigations in the Institute of Theoretical and Applied Mechanics
for 2003, Institute of Theoretical and Applied Mechanics SB, Russian Academy of Science, 2003
・Japan Thermal Spraying Society Award for best papers, Japan, June 2004
・Japan Thermal Spraying Society Award for outstanding performance, Japan, December 2004
・JENDI Award for encouragement, The Japanese Society for Non-Destructive Inspection, May 2006
・Lee Hsun Award, Institute of Metal Research Chinese Academy of Science, China, October 2006
・JSME Mechanical and Mechanics Award, JSME, October 2006
・JSME Award for achievement, The Japan Society of mechanical Engineers, October 2007
・JSME Meritorious Services Medal for the JSME 110th Anniversary, JSME, October 2007
・METI Minister Award for recognition of excellent contributions to nuclear safety, October 2009
・INSA de Lyon , France, Honorary Doctoral Degree, January 2010
・Science Council of Japan, the Prime Minister as a member, October 2011
・Japan Society of Maintechnology, FELLOW (JSM FELLOW), October 2011
・Prizes for Science and Technology, Research Category, The Commendation for Science and Technology by the Minister of Education, Culture, Sports, Science and Technology, April 2012
・Tsuyoshi Okamoto Memorial Lecture Award, Japan Society of Corrosion Engineering, April 2012
・Aalto University, Republic of Finland, Honorary Doctoral Degree, October 2012
・Award for achievement, Japan Society of Corrosion Engineering, May 2013
・JSME Honorary member, The Japan Society of mechanical Engineers, April 2014
・The Great Medal of CEFRACOR 2015, France, June 2016

科研项目

1998 - 2003 Physics and Chemistry of Fracture and Failure Prevention under Combined Environments
(Center of Excellence Program, Research Leader)

1999-2012 International Industries/ University/ Government Research Collaboration
(PEACE Program, Project Leader)

2003 - 2008 The Exploration of the Frontiers of Mechanical Science Based on Nanotechnology
(21st Century Center of Excellence Program, Program Leader)

2006 – 2013 METI Nuclear Industry Safety Agency project on Enhancement of Aging Management
and Maintenance of Nuclear Power Plants (Project Leader of Tohoku-Hokkaido cluster)

2007- 2016 Ministry of Education, Culture, Sports, Science and Technology(MEXT) project on Open Advanced
Facilities Initiative for Innovation (Strategic Use by Industry) (Project Leader)

2012-2015 International Industries/ University/ Government Collaboration (POLIM Program, Project Leader)

2013-2014 Nuclear Regulation Authority Project on Enhancement of Aging Management and
Maintenance of Nuclear Power Plants (Project Leader of Tohoku University)

2015-now Industries/ University Collaboration (OPCR Program, Project Leader)

2015-2017 New Energy and Industrial Technology Development Organization (NEDO) project on Advanced
Research Program for Energy and Environmental Technologies (Project Leader)